For the phyCORE-i.MX6 add an automount command for the first partition on the eMMC device. Signed-off-by: Stefan Christ <s.christ@xxxxxxxxx> --- .../phytec-som-imx6/defaultenv-physom-imx6-phycore/init/automount | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boards/phytec-som-imx6/defaultenv-physom-imx6-phycore/init/automount b/arch/arm/boards/phytec-som-imx6/defaultenv-physom-imx6-phycore/init/automount index 3659cf7..a059e19 100644 --- a/arch/arm/boards/phytec-som-imx6/defaultenv-physom-imx6-phycore/init/automount +++ b/arch/arm/boards/phytec-som-imx6/defaultenv-physom-imx6-phycore/init/automount @@ -12,3 +12,6 @@ automount /mnt/tftp 'ifup eth0 && mount -t tftp $eth0.serverip /mnt/tftp' mkdir -p /mnt/mmc automount -d /mnt/mmc 'mmc0.probe=1 && [ -e /dev/mmc0.0 ] && mount /dev/mmc0.0 /mnt/mmc' + +mkdir -p /mnt/emmc +automount -d /mnt/emmc 'mmc3.probe=1 && [ -e /dev/mmc3.0 ] && mount /dev/mmc3.0 /mnt/emmc' -- 1.9.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox