[PATCH 1/1] ARM i.MX35: Read reset source from CCM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



CCM has reset status bits with more detailed information than the
watchdog. Set reset source with higher priority.

Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
---
 arch/arm/mach-imx/clk-imx35.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 2433d73..af6c405 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -14,6 +14,7 @@
 #include <linux/clkdev.h>
 #include <linux/err.h>
 #include <mach/imx35-regs.h>
+#include <reset_source.h>
 
 #include "clk.h"
 
@@ -95,12 +96,31 @@ static int imx35_ccm_probe(struct device_d *dev)
 	struct arm_ahb_div *aad;
 	unsigned char *hsp_div;
 	void __iomem *base;
+	u32 reg;
 
 	iores = dev_request_mem_resource(dev, 0);
 	if (IS_ERR(iores))
 		return PTR_ERR(iores);
 	base = IOMEM(iores->start);
 
+	/* Check reset source */
+	reg = readl(base + CCM_RCSR);
+
+	switch (reg & 0x0F) {
+	case 0x00:
+		reset_source_set_priority(RESET_POR, 200);
+		break;
+	case 0x02:
+		reset_source_set_priority(RESET_JTAG, 200);
+		break;
+	case 0x04:
+		reset_source_set_priority(RESET_RST, 200);
+		break;
+	case 0x08:
+		reset_source_set_priority(RESET_WDG, 200);
+		break;
+	}
+
 	writel(0xffffffff, base + CCM_CGR0);
 	writel(0xffffffff, base + CCM_CGR1);
 	writel(0xfbffffff, base + CCM_CGR2);
-- 
2.7.3


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux