The relevant informations which command is sent for which page
is already contained in the informations imx_nand_command() prints, so
remove the debug prints in send_cmd and send_addr (which only exist for
v1/v2 controllers, not for v3). Also use dev_dbg to print debug
informations instead of MTD_DEBUG.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
drivers/mtd/nand/nand_imx.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/nand_imx.c b/drivers/mtd/nand/nand_imx.c
index 77c0ad8..590d7fe 100644
--- a/drivers/mtd/nand/nand_imx.c
+++ b/drivers/mtd/nand/nand_imx.c
@@ -261,8 +261,6 @@ static void send_cmd_v3(struct imx_nand_host *host, uint16_t cmd)
static void send_cmd_v1_v2(struct imx_nand_host *host, u16 cmd)
{
- MTD_DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd);
-
writew(cmd, host->regs + NFC_V1_V2_FLASH_CMD);
writew(NFC_CMD, host->regs + NFC_V1_V2_CONFIG2);
@@ -301,8 +299,6 @@ static void send_addr_v3(struct imx_nand_host *host, uint16_t addr)
static void send_addr_v1_v2(struct imx_nand_host *host, u16 addr)
{
- MTD_DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
-
writew(addr, host->regs + NFC_V1_V2_FLASH_ADDR);
writew(NFC_ADDR, host->regs + NFC_V1_V2_CONFIG2);
@@ -891,7 +887,7 @@ static void imx_nand_command(struct mtd_info *mtd, unsigned command,
struct nand_chip *nand_chip = mtd->priv;
struct imx_nand_host *host = nand_chip->priv;
- MTD_DEBUG(MTD_DEBUG_LEVEL3,
+ dev_dbg(host->dev,
"imx_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
command, column, page_addr);
--
2.7.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
