The stuff we currently have in the i.MX6q dts file can be reused for
the i.MX6dl variants, so factor out a common dtsi file.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
arch/arm/dts/imx6dl-tx6u-801x.dts | 58 +-------------------------------------
arch/arm/dts/imx6qdl-tx6x.dtsi | 59 +++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+), 57 deletions(-)
create mode 100644 arch/arm/dts/imx6qdl-tx6x.dtsi
diff --git a/arch/arm/dts/imx6dl-tx6u-801x.dts b/arch/arm/dts/imx6dl-tx6u-801x.dts
index a480408..b6018a6 100644
--- a/arch/arm/dts/imx6dl-tx6u-801x.dts
+++ b/arch/arm/dts/imx6dl-tx6u-801x.dts
@@ -1,65 +1,9 @@
#include <arm/imx6dl-tx6u-801x.dts>
#include "imx6qdl.dtsi"
+#include "imx6qdl-tx6x.dtsi"
/ {
model = "Ka-Ro electronics TX6U-801x Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
- chosen {
- linux,stdout-path = &uart1;
-
- environment@0 {
- compatible = "barebox,environment";
- device-path = &gpmi, "partname:barebox-environment";
- };
- };
-};
-
-&gpmi {
- partition@0 {
- label = "barebox";
- reg = <0x0 0x400000>;
- };
-
- partition@1 {
- label = "barebox-environment";
- reg = <0x400000 0x100000>;
- };
};
-&iomuxc {
- imx6qdl-tx6 {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */
- MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */
- MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */
- MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */
- >;
- };
-
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
- MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
- MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
- MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
- MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
- MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
- MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0
- >;
- };
- };
-};
-
-&fec {
- phy-reset-duration = <22>;
-};
-
-&ocotp {
- barebox,provide-mac-address = <&fec 0x620>;
-};
diff --git a/arch/arm/dts/imx6qdl-tx6x.dtsi b/arch/arm/dts/imx6qdl-tx6x.dtsi
new file mode 100644
index 0000000..7584e43
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-tx6x.dtsi
@@ -0,0 +1,59 @@
+/ {
+ chosen {
+ linux,stdout-path = &uart1;
+
+ environment-nand {
+ compatible = "barebox,environment";
+ device-path = &gpmi, "partname:barebox-environment";
+ };
+ };
+};
+
+&fec {
+ phy-reset-duration = <22>;
+};
+
+&gpmi {
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@1 {
+ label = "barebox-environment";
+ reg = <0x400000 0x100000>;
+ };
+};
+
+&iomuxc {
+ imx6qdl-tx6 {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */
+ MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0
+ >;
+ };
+ };
+};
+
+&ocotp {
+ barebox,provide-mac-address = <&fec 0x620>;
+};
--
2.7.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
