> Can you mount the same device with the -tfat option to mount? Well same problem: mount: No such file or directory > I assume it's a GPT partition, right? It isn't: there is no partition table, it is directly the FS on it. > That's your problem.With /dev/mmc2.netcom detected as MBR barebox won't automatically try to mount a FAT filesystem. Of course it is, and if the method I am currently using to create the FS is wrong, I'll change that, don't worry :) Regards, -- Philippe LEDUC ledphilippe@xxxxxxxxx 2016-02-25 10:51 GMT+01:00 Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>: > On Thu, Feb 25, 2016 at 10:37:35AM +0100, Philippe Leduc wrote: >> Hi, >> >> This was working before :) (at least with barebox version 2015.10). >> Honestly , this may be a misconfiguration on our part (and the fact >> that it worked doesn't mean that it was a normal behavior). >> >> Here is the output: >> filetype /dev/mmc2.netcom >> /dev/mmc2.netcom: MBR sector (mbr) > > That's your problem. With /dev/mmc2.netcom detected as MBR barebox won't > automatically try to mount a FAT filesystem. > What is /dev/mmc2.netcom anyway? I assume it's a GPT partition, right? > > Can you mount the same device with the -tfat option to mount? > > Sascha > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox