Hi Sascha,
here my oftables section from barebox.map:
.oftables 0x278f7bc0 0x18
0x278f7bc0 . = ALIGN (0x8)
0x278f7bc0 __clk_of_table_start = .
*(.__clk_of_table_*)
.__clk_of_table_end
0x278f7bc0 0x8 drivers/built-in.o
0x278f7bc0 __clk_of_table_sentinel
.__clk_of_table_fixed_clk
0x278f7bc8 0x8 drivers/built-in.o
0x278f7bc8 __clk_of_table_fixed_clk
.__clk_of_table_fixed_factor_clk
0x278f7bd0 0x8 drivers/built-in.o
0x278f7bd0 __clk_of_table_fixed_factor_clk
0x278f7bd8 __clk_of_table_end = .
from imx6qdl.dtsi:
...
clocks {
#address-cells = <1>;
#size-cells = <0>;
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
};
...
I' m not quite sure how to read the barebox.map at this Point. Do I have clocks in Image or not? The parsercode just breaks out without finding any enumerated items....
Mit freundlichen Grüßen aus Berg/ With kind regards
i.A. Andreas Willig
Dipl.-Ing. (FH)
Entwicklung Elektronik
RAFI GmbH & Co. KG
Postfach 2060
88276 Ravensburg
Tel.: +49 (0) 751 89-6142
mailto:andreas.willig@xxxxxxx, http://www.rafi.de
Kommanditgesellschaft: Sitz Berg, Amtsgericht Ulm, HRA 550059
Komplementär: RAFI Beteiligungs-GmbH, Sitz Berg, Amtsgericht Ulm HRB 550074
Geschäftsführer: Albert Wasmeier, Dipl.-Kfm. Gerhard Schenk
USt-Ident.-Nr.: DE 146 392 319, Steuer-Nr.: 77079/00291
-----Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> schrieb: -----
An: andreas.willig@xxxxxxx
Von: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Datum: 09.06.2015 12:18
Kopie: barebox@xxxxxxxxxxxxxxxxxxx
Betreff: Re: Clocks on Barebox
On Mon, Jun 01, 2015 at 10:12:55AM +0200, andreas.willig@xxxxxxx wrote:
> Hi all
> i just updated from 2014 to latest Barebox and hit the following problem:
> of_clk_init from clk.c:451 does not find any entries. matches is set to __clk_of_table start where compatible=0 and data=0,
Do you mean the clk_of_table is empty? Could you post an excerpt from
you barebox.map file containing the __clk_of_table? Here it looks like:
0x0000000000092178 __clk_of_table_start =
.
*(.__clk_of_table_*)
.__clk_of_table_fixed_clk
0x0000000000092178 0x8 drivers/built-in.o
0x0000000000092178
__clk_of_table_fixed_clk
.__clk_of_table_fixed_factor_clk
0x0000000000092180 0x8 drivers/built-in.o
0x0000000000092180
__clk_of_table_fixed_factor_clk
.__clk_of_table_end
0x0000000000092188 0x8 drivers/built-in.o
0x0000000000092188
__clk_of_table_sentinel
0x0000000000092190 __clk_of_table_end = .
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
