From: Lucas Stach <l.stach@xxxxxxxxxxxxxx> Correct the pinmux configuration for the chip-select GPIOs. This fixes detection of the first SPI NOR-flash after barebox itself got loaded from there. Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> --- arch/arm/dts/imx6dl-eltec-hipercam.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/imx6dl-eltec-hipercam.dts b/arch/arm/dts/imx6dl-eltec-hipercam.dts index 8140c4b..737752f 100644 --- a/arch/arm/dts/imx6dl-eltec-hipercam.dts +++ b/arch/arm/dts/imx6dl-eltec-hipercam.dts @@ -226,8 +226,8 @@ fsl,pins = <MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 >; }; -- 2.1.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
