Hi Andrey, I applied this series with some small changes. Thanks Sascha On Wed, May 06, 2015 at 12:31:55PM -0700, Andrey Smirnov wrote: > This patch set combines all previously sent patches together: > > - Serial cleanups > - Bootstap code fixes/cleanup > - Boot via IRAM > > I marked the whole thing as a version 3 since some of the included > patches in some of their incarnations had version 2 and I wanted to > decrease the amount of confusion I was creating :) > > Andrey Smirnov (18): > i.MX: Move UART definitions into a separate file > i.MX: serial: Add constants for UART clock divisor > i.MX: serial: Add baud rate calculation convenience functions > i.MX: serial: Add UART init functions for DEBUG_LL > i.MX: serial: Convert PUTC_LL to use IOMEM > i.MX: serial: Convert i.MX51 and i.MX6 to use 'imx*_uart_setup_ll' > i.MX51: babbage: Implement CONFIG_DEBUG_LL > i.MX: serial: Distil common clock ungating code > Makefile.lib: Make 'check_file_size' more flexible > i.MX: Add provisions to boot from IRAM > imx-image: Correctly fill image size in prepended header > bootstrap: Fix potential memory leak in 'read_image_head' > bootstrap_read_devfs(): Check for errors from devfs_add_partition() > bootstrap_read_devfs(): Close file after we are done with it > bootstrap_read_devfs(): Fix potential memory leak > bootstrap_read_devfs(): Check for errors from dev_add_bb_dev() > bootstrap_read_devfs(): Remove all partitions upon function completion > bootstrap: Warn if image size in BB header is zero > > Documentation/boards/imx.rst | 27 +++++ > Makefile | 2 +- > arch/arm/boards/eltec-hipercam/lowlevel.c | 18 +-- > arch/arm/boards/embest-riotboard/lowlevel.c | 16 +-- > arch/arm/boards/freescale-mx51-babbage/Makefile | 3 + > arch/arm/boards/freescale-mx51-babbage/board.c | 60 ++++++++++ > .../flash-header-common.imxcfg | 58 ++++++++++ > .../flash-header-imx51-babbage-xload.imxcfg | 3 + > .../flash-header-imx51-babbage.imxcfg | 60 +--------- > arch/arm/boards/freescale-mx51-babbage/lowlevel.c | 67 +++++++++++ > .../arm/boards/freescale-mx6sx-sabresdb/lowlevel.c | 20 +--- > arch/arm/boards/guf-santaro/lowlevel.c | 18 +-- > arch/arm/boards/karo-tx6x/lowlevel.c | 21 +--- > arch/arm/boards/phytec-phycard-imx6/lowlevel.c | 21 +--- > arch/arm/boards/phytec-phyflex-imx6/lowlevel.c | 21 +--- > arch/arm/boards/tqma6x/lowlevel.c | 18 +-- > arch/arm/boards/variscite-mx6/lowlevel.c | 21 +--- > arch/arm/configs/imx_v7-xload_defconfig | 52 +++++++++ > arch/arm/mach-imx/Kconfig | 15 +++ > arch/arm/mach-imx/Makefile | 1 + > arch/arm/mach-imx/include/mach/clock-imx51_53.h | 5 +- > arch/arm/mach-imx/include/mach/debug_ll.h | 85 ++++++++++++-- > arch/arm/mach-imx/xload.c | 52 +++++++++ > arch/arm/pbl/Makefile | 2 +- > arch/mips/pbl/Makefile | 2 +- > drivers/serial/serial_imx.c | 112 +----------------- > images/Makefile.imx | 20 +++- > include/serial/imx-uart.h | 128 +++++++++++++++++++++ > lib/bootstrap/devfs.c | 59 ++++++++-- > scripts/Makefile.lib | 6 +- > scripts/imx/Makefile | 2 + > scripts/imx/imx-image.c | 11 +- > 32 files changed, 658 insertions(+), 348 deletions(-) > create mode 100644 arch/arm/boards/freescale-mx51-babbage/flash-header-common.imxcfg > create mode 100644 arch/arm/boards/freescale-mx51-babbage/flash-header-imx51-babbage-xload.imxcfg > create mode 100644 arch/arm/configs/imx_v7-xload_defconfig > create mode 100644 arch/arm/mach-imx/xload.c > create mode 100644 include/serial/imx-uart.h > > -- > 2.1.4 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
