Re: [PATCH 01/13] net: phy: Support Marvell 88E1318S PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sebastian,

On 04/09/2015 10:03 PM, Sebastian Hesselbarth wrote:
> This adds support for the Marvell 88E1318S Gigabit Ethernet PHY.
> 
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
> ---
> Cc: barebox@xxxxxxxxxxxxxxxxxxx
> ---
>  drivers/net/phy/marvell.c | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
> index aaf9f53451f4..6409f14ae2e2 100644
> --- a/drivers/net/phy/marvell.c
> +++ b/drivers/net/phy/marvell.c
> @@ -35,6 +35,9 @@
>  #define MII_88E1121_PHY_MSCR_DELAY_MASK	\
>  	(MII_88E1121_PHY_MSCR_RX_DELAY | MII_88E1121_PHY_MSCR_TX_DELAY)
>  
> +#define MII_88E1318S_PHY_MSCR1_REG	16
> +#define MII_88E1318S_PHY_MSCR1_PAD_ODD	BIT(6)
> +
>  #define MII_88E1540_LED_PAGE		0x3
>  #define MII_88E1540_LED_CONTROL		0x10
>  
> @@ -214,6 +217,25 @@ static int m88e1121_config_init(struct phy_device *phydev)
>  	return 0;
>  }
>  
> +static int m88e1318s_config_init(struct phy_device *phydev)
> +{
> +	u16 reg;
> +	int ret;
> +
> +	ret = phy_write(phydev, MII_MARVELL_PHY_PAGE,
> +			MII_88E1121_PHY_MSCR_PAGE);
> +	if (ret < 0)
> +		return ret;
> +
> +	reg = phy_read(phydev, MII_88E1318S_PHY_MSCR1_REG);
> +	reg |= MII_88E1318S_PHY_MSCR1_PAD_ODD;
> +	ret = phy_write(phydev, MII_88E1318S_PHY_MSCR1_REG, reg);
> +	if (ret < 0)
> +		return ret;
> +
> +	return m88e1121_config_init(phydev);
> +}
> +
>  static struct phy_driver marvell_phys[] = {
>  	{
>  		.phy_id		= MARVELL_PHY_ID_88E1121R,
> @@ -225,6 +247,15 @@ static struct phy_driver marvell_phys[] = {
>  		.read_status	= marvell_read_status,
>  	},
>  	{
> +		.phy_id		= MARVELL_PHY_ID_88E1318S,
> +		.phy_id_mask	= MARVELL_PHY_ID_MASK,
> +		.drv.name	= "Marvell 88E1318S",
> +		.features	= PHY_GBIT_FEATURES,
> +		.config_init	= m88e1318s_config_init,
> +		.config_aneg	= genphy_config_aneg,
> +		.read_status	= marvell_read_status,
> +	},
> +	{
>  		.phy_id		= MARVELL_PHY_ID_88E1543,
>  		.phy_id_mask	= MARVELL_PHY_ID_MASK,
>  		.drv.name	= "Marvell 88E1543",
> 

With this commit, the Openblocks A6 PHY is not brought up, and so
network is broken.

I'll look into it (unless you have an idea),
-- 
Ezequiel Garcia, VanguardiaSur
www.vanguardiasur.com.ar

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox




[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux