RGMII-ID just defines transmitter internal delays. Otherwise it is the same as RGMII. As the differences only influence the behaviour of the phy, the fec driver should handle it the same way as RGMII. Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx> --- drivers/net/fec_imx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c index c1fa1517da81..54095e7b7ab7 100644 --- a/drivers/net/fec_imx.c +++ b/drivers/net/fec_imx.c @@ -309,7 +309,10 @@ static int fec_init(struct eth_device *dev) } } - if (fec->interface == PHY_INTERFACE_MODE_RGMII) + if (fec->interface == PHY_INTERFACE_MODE_RGMII || + fec->interface == PHY_INTERFACE_MODE_RGMII_ID || + fec->interface == PHY_INTERFACE_MODE_RGMII_TXID || + fec->interface == PHY_INTERFACE_MODE_RGMII_RXID) rcntl |= 1 << 6; writel(rcntl, fec->regs + FEC_R_CNTRL); -- 2.1.4 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
