Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx> --- Documentation/boards/mips/ainol-novo7-paladin.rst | 45 +++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/Documentation/boards/mips/ainol-novo7-paladin.rst b/Documentation/boards/mips/ainol-novo7-paladin.rst new file mode 100644 index 0000000..becfcd0 --- /dev/null +++ b/Documentation/boards/mips/ainol-novo7-paladin.rst @@ -0,0 +1,45 @@ +Ainol Novo7 Paladin +=================== + +The tablet has + + * Ingenic JZ4770 SoC; + * 512 MiB DDR2 SDRAM; + * 8 GiB eMMC Flash Memory; + * UART; + * touchscreen (800x480); + * 1xUSB interface; + * buttons. + +The tablet uses X-Boot (Ingenic's not interactive U-Boot) as bootloader. + +Running barebox +--------------- + + 1. Connect to the tablet's UART (see. http://a320.emulate.su/2012/05/14/mini-obzor-planshet-ainol-novo7-paladin-i-processor-jz4770/); + + 2. Download and compile ingenic-boot tool for GCW0 + +.. code-block:: none + + $ git clone https://github.com/gcwnow/ingenic-boot + $ cd ingenic-boot + ingenic-boot$ make +.. + + 3. Push & hold VOL- (GPIO 114 aka D18) while power on or reset (this selects USB boot mode by activating BOOTSEL1 signal); + + 3. Upload and start barebox: + +.. code-block:: none + + ingenic-boot$ sudo ./tool/down2ram.sh --config=gcw0_v11_ddr2_512mb --bin=${PATH_TO_BAREBOX_DIR}/barebox-flash-image --downto=0xa0800000 --runat=0xa0800000 +.. + +Links +----- + + * http://www.ainol-novo.com/ainol-novo-7-paladin-first-android-4-0-tablet-pc.html + * ftp://ftp.ingenic.cn/SOC/JZ4770/JZ4770_DS.PDF + * https://github.com/IngenicSemiconductor/X-BOOT_NPM801 + * https://github.com/gcwnow/UBIBoot -- 2.1.4 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
