On Mon, Jan 26, 2015 at 10:33:47PM +0100, Robert Jarzmik wrote:
> +
> +static int lubbock_mem_init(void)
> +{
> + arm_add_mem_device("ram0", 0xa0000000, SZ_64M);
> + arm_add_mem_device("sram0", 0x0a000000, SZ_1M);
When doing this you'll end up with the SRAM being in ATAGS which is
probably not what you want. Use add_mem_device() instead.
> + return 0;
> +}
> +mem_initcall(lubbock_mem_init);
> diff --git a/arch/arm/boards/lubbock/env/bin/init b/arch/arm/boards/lubbock/env/bin/init
> new file mode 100644
> index 0000000..6cd0acb
> --- /dev/null
> +++ b/arch/arm/boards/lubbock/env/bin/init
> @@ -0,0 +1,24 @@
> +#!/bin/sh
> +
> +PATH=/env/bin
> +export PATH
> +
> +. /env/config
> +addpart /dev/nor0 $mtdparts
> +
> +# Phase1: check for MTD override
> +mtd_env_override
> +if [ $? = 0 ]; then
> + echo "Switching to custom environment"
> + /env/init
> + exit
> +fi
> +
> +# Phase2: initiate network
> +eth0.ethaddr="08:00:3e:26:0a:5b"
No hardcoded MAC addresses please. barebox generates a random MAC
address for you if your board is unable to provide a real one.
> +dhcp -H lubbock
dhcp during init time? This unnecessarily delays the boot process when
booting from flash.
This environment looks very specific to your usecase. Can't you just use
the generic defenv-2 template?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
