The MX23 needs a different image config, so use separate files for MX23/MX28. Signed-off-by: Jan Luebbe <jlu@xxxxxxxxxxxxxx> --- arch/arm/mach-mxs/mxs23img.cfg | 6 ++++++ arch/arm/mach-mxs/mxs28img.cfg | 8 ++++++++ arch/arm/mach-mxs/mxsimg.cfg | 8 -------- images/Makefile.mxs | 5 +++-- 4 files changed, 17 insertions(+), 10 deletions(-) create mode 100644 arch/arm/mach-mxs/mxs23img.cfg create mode 100644 arch/arm/mach-mxs/mxs28img.cfg delete mode 100644 arch/arm/mach-mxs/mxsimg.cfg diff --git a/arch/arm/mach-mxs/mxs23img.cfg b/arch/arm/mach-mxs/mxs23img.cfg new file mode 100644 index 0000000..34e8848 --- /dev/null +++ b/arch/arm/mach-mxs/mxs23img.cfg @@ -0,0 +1,6 @@ +SECTION 0x0 BOOTABLE + TAG LAST + LOAD 0x1000 @PREP@ + CALL 0x1000 0x0 + LOAD 0x40002000 @BOOTLOADER@ + CALL 0x40002000 0x0 diff --git a/arch/arm/mach-mxs/mxs28img.cfg b/arch/arm/mach-mxs/mxs28img.cfg new file mode 100644 index 0000000..0ff2c35 --- /dev/null +++ b/arch/arm/mach-mxs/mxs28img.cfg @@ -0,0 +1,8 @@ +SECTION 0x0 BOOTABLE + TAG LAST + LOAD 0x1000 @PREP@ + LOAD IVT 0x8000 0x1000 + CALL HAB 0x8000 0x0 + LOAD 0x40002000 @BOOTLOADER@ + LOAD IVT 0x8000 0x40002000 + CALL HAB 0x8000 0x0 diff --git a/arch/arm/mach-mxs/mxsimg.cfg b/arch/arm/mach-mxs/mxsimg.cfg deleted file mode 100644 index 0ff2c35..0000000 --- a/arch/arm/mach-mxs/mxsimg.cfg +++ /dev/null @@ -1,8 +0,0 @@ -SECTION 0x0 BOOTABLE - TAG LAST - LOAD 0x1000 @PREP@ - LOAD IVT 0x8000 0x1000 - CALL HAB 0x8000 0x0 - LOAD 0x40002000 @BOOTLOADER@ - LOAD IVT 0x8000 0x40002000 - CALL HAB 0x8000 0x0 diff --git a/images/Makefile.mxs b/images/Makefile.mxs index 41db9c4..811345c 100644 --- a/images/Makefile.mxs +++ b/images/Makefile.mxs @@ -19,11 +19,12 @@ $(obj)/%.mxssd: $(obj)/% $(call if_changed,mxs_sd) board = $(srctree)/arch/$(ARCH)/boards -mxscfg = $(srctree)/arch/arm/mach-mxs/mxsimg.cfg +mxs23cfg = $(srctree)/arch/arm/mach-mxs/mxs23img.cfg +mxs28cfg = $(srctree)/arch/arm/mach-mxs/mxs28img.cfg pblx-$(CONFIG_MACH_TX28) += start_barebox_karo_tx28 prep_start_barebox_karo_tx28 PREP_start_barebox_karo_tx28.pblx.mxsbs = start_barebox_karo_tx28_prep -CFG_start_barebox_karo_tx28.mxsbs = $(mxscfg) +CFG_start_barebox_karo_tx28.mxsbs = $(mxs28cfg) FILE_barebox-karo-tx28-bootstream.img = start_barebox_karo_tx28.mxsbs image-$(CONFIG_MACH_TX28) += barebox-karo-tx28-bootstream.img FILE_barebox-karo-tx28-sd.img = start_barebox_karo_tx28.mxsbs.mxssd -- 2.1.4 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
