Hi, I try to run barebox on the beagleboard with the default configuration (am335x_defconfig & am335x_mlo_defconfig), however the board crashes with the following trace : barebox 2014.12.0-00117-g631be8e #61 Wed Dec 24 14:58:09 GMT 2014 Board: TI AM335x BeagleBone detected 'BeagleBone White' omap-hsmmc 48060000.mmc: registered as 48060000.mmc booting from MMC mmc0: detected SD card version 2.0 mmc0: registered mmc0 barebox 2014.12.0-00117-g631be8e #60 Wed Dec 24 14:58:02 GMT 2014 Board: TI AM335x BeagleBone detected 'BeagleBone White' cpsw 4a100000.ethernet: detected phy mask 0x1 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:18:31:8e:61:71 cpsw 4a100000.ethernet: probe failed: I/O error unable to handle paging request at address 0x6e6f62f2 pc : [<8fe2e29e>] lr : [<8fe0764d>] sp : 8ffffe68 ip : 87f1f068 fp : 8fe62a40 r10: 87f1f040 r9 : 87f12078 r8 : 87f1f0fc r7 : ffffffff r6 : 87f1f068 r5 : 8fe62a40 r4 : 6e6f62f2 r3 : 00000000 r2 : 00000000 r1 : 87f1f068 r0 : 6e6f62f2 Flags: nZCV IRQs off FIQs on Mode SVC_32 [<8fe2e29e>] (strcmp+0xc/0x1a) from [<8fe0764d>] (get_device_by_name_id +0x19/0x38) [<8fe0764d>] (get_device_by_name_id+0x19/0x38) from [<8fe07967>] (register_device+0x17/0xcc) [<8fe07967>] (register_device+0x17/0xcc) from [<8fe25d6f>] (of_platform_device_create+0x183/0x1b0) [<8fe25d6f>] (of_platform_device_create+0x183/0x1b0) from [<8fe25dc7>] (of_platform_bus_create+0x2b/0x68) [<8fe25dc7>] (of_platform_bus_create+0x2b/0x68) from [<8fe25e4f>] (of_platform_populate+0x23/0x40) [<8fe25e4f>] (of_platform_populate+0x23/0x40) from [<8fe07a9f>] (platform_probe+0x9/0xa) [<8fe07a9f>] (platform_probe+0x9/0xa) from [<8fe07695>] (device_probe +0x11/0x44) [<8fe07695>] (device_probe+0x11/0x44) from [<8fe076ed>] (match.part.1 +0x25/0x2a) [<8fe076ed>] (match.part.1+0x25/0x2a) from [<8fe077f9>] (register_driver +0x4d/0x74) [<8fe077f9>] (register_driver+0x4d/0x74) from [<8fe0080b>] (start_barebox+0x17/0xbc) [<8fe0080b>] (start_barebox+0x17/0xbc) from [<8fe3cd03>] (__start +0xa7/0xbc) [<8fe3cd03>] (__start+0xa7/0xbc) from [<8fe00005>] (__bare_init_start +0x1/0xc) [<8fe3c729>] (unwind_backtrace+0x1/0x58) from [<8fe2ed4d>] (panic +0x1d/0x34) [<8fe2ed4d>] (panic+0x1d/0x34) from [<8fe3cbc1>] (do_exception+0xd/0x10) [<8fe3cbc1>] (do_exception+0xd/0x10) from [<8fe3cc29>] (do_data_abort +0x21/0x2c) [<8fe3cc29>] (do_data_abort+0x21/0x2c) from [<8fe3c8e8>] (data_abort +0x48/0x60) If I remove the ethernet driver of the configuration, barebox doesn't crash. Some one knows this issue ? Some one have a solution or can help me to find a solution ? Thanks you ! & Merry Christmas ! Best regards Manuel ----------------------------- Eaton Industries (France) S.A.S ~ Siège social: 110 Rue Blaise Pascal, Immeuble Le Viséo - Bâtiment A Innovallée, 38330, Montbonnot-St.-Martin, France ~ Lieu d'enregistrement au registre du commerce: Grenoble ~ Numéro d'enregistrement: 509 653 176 ~ Capital social souscrit et liberé:€ 16215441 ~ Numéro de TVA: FR47509653176 ----------------------------- _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
