Thanks,
I debug common/partitions/dos.c and the problem is
"dos_extended_partition() is not executed. I found why :
On dos_partition function there is a test to know the type of partition
(line 212). The comment says "partition type 0x05 or 0x0f can be
extended and just 0x0f is tested. The type extended partition on my SD
card is 0x05 and then it doesn't work.
I modify the source code of common/partitions/dos.c with
if ((pentry.dos_partition_type ==
0x0f)||(pentry.dos_partition_type == 0x05)) {
and now it's work.
Victorien
Le 11/12/2014 12:32, Sascha Hauer a écrit :
On Thu, Dec 11, 2014 at 10:05:10AM +0100, Victorien Vedrine wrote:
Thanks for your answer.
In a first time, I used a barebox version with the last update at the
10/16/2013. I Found the patch which you are talking about and I update
barebox to the version of yesterday and I have the same problem.
The partitions of my SD card are this one (with fdisk) :
Périphérique Amorçage Début Fin Blocs Id. Système
/dev/sdg1 2048 6143 2048 53 OnTrack DM6 Aux3
/dev/sdg2 6144 10239 2048 10 OPUS
/dev/sdg3 10240 43007 16384 6 FAT16
/dev/sdg4 43008 15556607 7756800 5 Étendue
/dev/sdg5 43040 567327 262144 83 Linux
/dev/sdg6 567360 15556607 7494624 b W95 FAT32
I use an iMX28 processor and I have this line on device_init fonction to
add the SD card :
add_generic_device("mxs_mci", 0, NULL, IMX_SSP0_BASE, 0x2000,
IORESOURCE_MEM, &mci_pdata);
This is correct. If your card is shown then you made everything right
here.
Is there any tests that I can do to find a solution or more informations
for a bug ?
You could add a #define DEBUG on top of common/partitions/dos.c (above
the includes) and see if this gives more information. Otherwise you
can do some further debugging this file. Does dos_extended_partition()
get called?
Sascha
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
