Remove ethernet phy reset from board file. The reset is now made by the fec
driver since commit:
|commit 5c1846b625247f4b99eb429dcd5b0854699a4298
|Author: Rostislav Lisovy <lisovy@xxxxxxxxx>
|Date: Wed Nov 20 22:22:25 2013 +0100
|
| ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree
|
| Signed-off-by: Rostislav Lisovy <lisovy@xxxxxxxxx>
| Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Signed-off-by: Christian Hemp <c.hemp@xxxxxxxxx>
---
arch/arm/boards/phytec-phyflex-imx6/board.c | 13 -------------
1 files changed, 0 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boards/phytec-phyflex-imx6/board.c b/arch/arm/boards/phytec-phyflex-imx6/board.c
index fe3d1b2..131861d 100644
--- a/arch/arm/boards/phytec-phyflex-imx6/board.c
+++ b/arch/arm/boards/phytec-phyflex-imx6/board.c
@@ -32,8 +32,6 @@
#include <mach/iomux-mx6.h>
#include <mach/imx6.h>
-#define ETH_PHY_RST IMX_GPIO_NR(3, 23)
-
#define GPIO_2_11_PD_CTL MX6_PAD_CTL_PUS_100K_DOWN | MX6_PAD_CTL_PUE | MX6_PAD_CTL_PKE | \
MX6_PAD_CTL_SPEED_MED | MX6_PAD_CTL_DSE_40ohm | MX6_PAD_CTL_HYS
@@ -65,16 +63,6 @@ static void phyflex_err006282_workaround(void)
gpio_direction_input(MX6_PHYFLEX_ERR006282);
}
-static int eth_phy_reset(void)
-{
- gpio_request(ETH_PHY_RST, "phy reset");
- gpio_direction_output(ETH_PHY_RST, 0);
- mdelay(1);
- gpio_set_value(ETH_PHY_RST, 1);
-
- return 0;
-}
-
static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
{
phy_write(dev, 0x0d, device);
@@ -99,7 +87,6 @@ static int phytec_pfla02_init(void)
phyflex_err006282_workaround();
- eth_phy_reset();
phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
ksz9031rn_phy_fixup);
--
1.7.0.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
