Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx> --- Documentation/boards/mips/img-ci20.rst | 42 ++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/Documentation/boards/mips/img-ci20.rst b/Documentation/boards/mips/img-ci20.rst new file mode 100644 index 0000000..8f5cd80 --- /dev/null +++ b/Documentation/boards/mips/img-ci20.rst @@ -0,0 +1,42 @@ +MIPS Creator CI20 +================= + +The MIPS Creator CI20 board is a high performance, fully featured +Linux and Android development platform. + +Major hardware features include: + + * Ingenic JZ4780 SoC (dual 1.2GHz MIPS32 processor); + * 1 GiB DDR3 memory; + * 8 GiB NAND Flash; + * 2 x UART; + * Davicom dm9000 10/100 Ethernet controller; + * 2 x USB (host and OTG); + * HDMI output; + * 14-pin ETAG connector; + * GPIO, SPI, I2C, ADC, expansion headers. + + +The board uses U-Boot 2013.10 as bootloader. + + +Running barebox +--------------- + + 1. Boot the board with UART0 serial console. Stop the auto boot during U-boot. + + 2. Upload ``zbarebox.bin`` via Ymodem to the board and then run: + +.. code-block:: none + + ci20# loady 0xa8000000 + ... + ci20# go 0xa8000000 +.. + + +Links +----- + + * http://store.imgtec.com/product/mips-creator-ci20 + * http://elinux.org/MIPS_Creator_CI20 -- 2.1.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
