Hi Antony, 2014-09-08 8:53 GMT+02:00 Antony Pavlov <antonynpavlov@xxxxxxxxx>: > Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx> > Cc: Franck Jullien <franck.jullien@xxxxxxxxx> > --- > Documentation/boards/openrisc.rst | 51 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 51 insertions(+) > > diff --git a/Documentation/boards/openrisc.rst b/Documentation/boards/openrisc.rst > new file mode 100644 > index 0000000..0b36712 > --- /dev/null > +++ b/Documentation/boards/openrisc.rst > @@ -0,0 +1,51 @@ > +OpenRISC > +======== > + > +or1ksim > +------- > + > +Compile or1ksim emulator:: > + > + $ cd ~/ > + $ git clone https://github.com/fjullien/or1ksim You should use this repo: https://github.com/openrisc/or1ksim > + $ cd or1ksim > + $ ./configure > + $ make > + > +Create minimal or1ksim.cfg file:: > + > + section cpu > + ver = 0x12 > + cfgr = 0x20 > + rev = 0x0001 > + end > + > + section memory > + name = "RAM" > + type = unknown > + baseaddr = 0x00000000 > + size = 0x02000000 > + delayr = 1 > + delayw = 2 > + end > + > + section uart > + enabled = 1 > + baseaddr = 0x90000000 > + irq = 2 > + 16550 = 1 > + /* channel = "tcp:10084" */ > + channel = "xterm:" > + end > + > + section ethernet > + enabled = 1 > + baseaddr = 0x92000000 > + irq = 4 > + rtx_type = "tap" > + tap_dev = "tap0" > + end > + > +Run or1ksim:: > + > + $ ~/or1ksim/sim -f or1ksim.cfg barebox > -- > 2.1.0 > Franck. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
