Hi! Changes since v2: - don't forget to call the close hook - change compatible to make it clear that passive-serial means a fpga programming mode - minor cleanup The interface was tested on a Socfpga SoCkit board with v2014.08.0. Regards, Steffen Juergen Beisert (2): Add a Firmware programming framework Firmware: provide a handler to program Altera FPGAs Sascha Hauer (2): DT: Add binding for Altera FPGAs in passive-serial mode Firmware: socfpga: Add SoCFPGA FPGA program support .../bindings/firmware/altr,passive-serial.txt | 13 + arch/arm/dts/socfpga.dtsi | 6 + arch/arm/mach-socfpga/Makefile | 1 + arch/arm/mach-socfpga/include/mach/socfpga-regs.h | 2 + commands/Kconfig | 9 + commands/Makefile | 1 + commands/firmwareload.c | 66 ++++ common/Kconfig | 3 + common/Makefile | 1 + common/firmware.c | 211 ++++++++++ drivers/Kconfig | 1 + drivers/Makefile | 1 + drivers/firmware/Kconfig | 14 + drivers/firmware/Makefile | 2 + drivers/firmware/altera_serial.c | 315 +++++++++++++++ drivers/firmware/socfpga.c | 440 +++++++++++++++++++++ include/firmware.h | 42 ++ 17 files changed, 1128 insertions(+) create mode 100644 Documentation/devicetree/bindings/firmware/altr,passive-serial.txt create mode 100644 commands/firmwareload.c create mode 100644 common/firmware.c create mode 100644 drivers/firmware/Kconfig create mode 100644 drivers/firmware/Makefile create mode 100644 drivers/firmware/altera_serial.c create mode 100644 drivers/firmware/socfpga.c create mode 100644 include/firmware.h -- 2.1.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
