Increased the RAM frequency to 400MHz.
Recalculation of the RAM timing values was needed.
Signed-off-by: Teresa Gámez <t.gamez@xxxxxxxxx>
---
arch/arm/boards/phytec-phycore-am335x/lowlevel.c | 70 +++++++++++-----------
1 files changed, 35 insertions(+), 35 deletions(-)
diff --git a/arch/arm/boards/phytec-phycore-am335x/lowlevel.c b/arch/arm/boards/phytec-phycore-am335x/lowlevel.c
index ff1f04e..ff0b021 100644
--- a/arch/arm/boards/phytec-phycore-am335x/lowlevel.c
+++ b/arch/arm/boards/phytec-phycore-am335x/lowlevel.c
@@ -16,15 +16,15 @@
#include <debug_ll.h>
static const struct am33xx_cmd_control pcm051_cmd = {
- .slave_ratio0 = 0x40,
+ .slave_ratio0 = 0x80,
.dll_lock_diff0 = 0x0,
- .invert_clkout0 = 0x1,
- .slave_ratio1 = 0x40,
+ .invert_clkout0 = 0x0,
+ .slave_ratio1 = 0x80,
.dll_lock_diff1 = 0x0,
- .invert_clkout1 = 0x1,
- .slave_ratio2 = 0x40,
+ .invert_clkout1 = 0x0,
+ .slave_ratio2 = 0x80,
.dll_lock_diff2 = 0x0,
- .invert_clkout2 = 0x1,
+ .invert_clkout2 = 0x0,
};
struct pcm051_sdram_timings {
@@ -42,57 +42,57 @@ struct pcm051_sdram_timings timings[] = {
/* 1x256M16 */
[MT41J128M16125IT_1x256M16] = {
.regs = {
- .emif_read_latency = 0x6,
- .emif_tim1 = 0x0888A39B,
- .emif_tim2 = 0x26337FDA,
- .emif_tim3 = 0x501F830F,
- .sdram_config = 0x61C04AB2,
+ .emif_read_latency = 0x7,
+ .emif_tim1 = 0x0AAAD4DB,
+ .emif_tim2 = 0x26437FDA,
+ .emif_tim3 = 0x501F83FF,
+ .sdram_config = 0x61C052B2,
.zq_config = 0x50074BE4,
- .sdram_ref_ctrl = 0x0000093B,
+ .sdram_ref_ctrl = 0x00000C30,
},
.data = {
.rd_slave_ratio0 = 0x3B,
- .wr_dqs_slave_ratio0 = 0x3B,
- .fifo_we_slave_ratio0 = 0x97,
- .wr_slave_ratio0 = 0x76,
+ .wr_dqs_slave_ratio0 = 0x33,
+ .fifo_we_slave_ratio0 = 0x9c,
+ .wr_slave_ratio0 = 0x6f,
},
},
/* 1x128M16 */
[MT41J64M1615IT_1x128M16] = {
.regs = {
- .emif_read_latency = 0x6,
- .emif_tim1 = 0x0888A39B,
- .emif_tim2 = 0x26247FDA,
- .emif_tim3 = 0x501F821F,
- .sdram_config = 0x61C04A32,
+ .emif_read_latency = 0x7,
+ .emif_tim1 = 0x0AAAE4DB,
+ .emif_tim2 = 0x262F7FDA,
+ .emif_tim3 = 0x501F82BF,
+ .sdram_config = 0x61C05232,
.zq_config = 0x50074BE4,
- .sdram_ref_ctrl = 0x0000093B,
+ .sdram_ref_ctrl = 0x00000C30,
},
.data = {
- .rd_slave_ratio0 = 0x3A,
- .wr_dqs_slave_ratio0 = 0x36,
+ .rd_slave_ratio0 = 0x38,
+ .wr_dqs_slave_ratio0 = 0x34,
.fifo_we_slave_ratio0 = 0xA2,
- .wr_slave_ratio0 = 0x74,
+ .wr_slave_ratio0 = 0x72,
},
},
/* 1x512MB */
[MT41J256M16HA15EIT_1x512M16] = {
.regs = {
- .emif_read_latency = 0x6,
- .emif_tim1 = 0x0888A39B,
- .emif_tim2 = 0x26517FDA,
- .emif_tim3 = 0x501F84EF,
- .sdram_config = 0x61C04B32,
+ .emif_read_latency = 0x7,
+ .emif_tim1 = 0x0AAAE4DB,
+ .emif_tim2 = 0x266B7FDA,
+ .emif_tim3 = 0x501F867F,
+ .sdram_config = 0x61C05332,
.zq_config = 0x50074BE4,
- .sdram_ref_ctrl = 0x0000093B,
+ .sdram_ref_ctrl = 0x00000C30
},
.data = {
- .rd_slave_ratio0 = 0x3B,
- .wr_dqs_slave_ratio0 = 0x3B,
- .fifo_we_slave_ratio0 = 0x96,
- .wr_slave_ratio0 = 0x76,
+ .rd_slave_ratio0 = 0x35,
+ .wr_dqs_slave_ratio0 = 0x43,
+ .fifo_we_slave_ratio0 = 0x97,
+ .wr_slave_ratio0 = 0x7b,
},
},
};
@@ -122,7 +122,7 @@ static noinline void pcm051_board_init(int sdram)
writel(WDT_DISABLE_CODE2, AM33XX_WDT_REG(WSPR));
while (readl(AM33XX_WDT_REG(WWPS)) != 0x0);
- am33xx_pll_init(MPUPLL_M_600, 25, DDRPLL_M_303);
+ am33xx_pll_init(MPUPLL_M_600, 25, DDRPLL_M_400);
am335x_sdram_init(0x18B, &pcm051_cmd,
&timing->regs,
--
1.7.0.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
