Ezequiel, I'm fine with this series, so with the comments from Sebastian fixed I could apply it. Sascha On Sat, Aug 23, 2014 at 07:53:35PM -0300, Ezequiel Garcia wrote: > Here goes a new round of the support for the network controller present > on Marvell Armada 370/XP SoC. > > The first patch enables the peripherals in a PUP register, which is required > on RGMII ports. > > The second and third patches add support for Marvell's 88E1543 and 88E1545 PHY > chips. > > The fourth patch adds the mvneta driver. Most of the configuration part is > based on Linux's mvneta driver, while some of code organization is based > on Barebox's orion-gbe driver. > > The last patch adds network support in the defconfigs. > > This has been tested on Armada XP GP, Armada XP Openblocks AX3 and > Armada 370 Mirabox boards. Linux zImage loads and boots fine, and the > network interfaces work from the kernel. > > Ezequiel Garcia (5): > ARM: mvebu: Enable PUP register > net: phy: Support Marvell 88EE1545 PHY > net: phy: Support Marvell 88EE1543 PHY > net: Add driver for Armada 370/XP 10/100/1000 Mbps network controller > configs: Add network options to Armada 370/XP boards > > arch/arm/configs/globalscale_mirabox_defconfig | 4 + > arch/arm/configs/marvell_armada_xp_gp_defconfig | 4 + > arch/arm/configs/plathome_openblocks_ax3_defconfig | 4 + > arch/arm/mach-mvebu/armada-370-xp.c | 5 + > .../mach-mvebu/include/mach/armada-370-xp-regs.h | 7 + > drivers/net/Kconfig | 6 + > drivers/net/Makefile | 1 + > drivers/net/mvneta.c | 758 +++++++++++++++++++++ > drivers/net/phy/marvell.c | 69 ++ > 9 files changed, 858 insertions(+) > create mode 100644 drivers/net/mvneta.c > > -- > 2.0.1 > > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
