On 08/23/2014 10:19 PM, Ezequiel Garcia wrote:
This two-piece patchset adds support for Plat'home's Openblocks A6 board [1]. To make it a little more interesting, NAND support (ported from Linux) is included. Let's hope we can see USB and SATA soon!
I have postponed USB(-PHY) until Antoine gets his Chipidea gen-phy patches through on LKML. When that is done, I plan to add a CI-stub and PHY drivers for barebox and moving MVEBU USB over to CI in Linux. I haven't thought about SATA but the controller is AHCI-compatible. All we need is a stub for the controller, PHY drivers for KW+Dove, and PHY drivers including SERDES setup for Armada 370/XP. I can have a look at it as I already took SERDES setup apart for PCIe. Sebastian
[1] http://openblocks.plathome.com/products/a6/ Ezequiel Garcia (2): nand: Add Marvell Orion NAND driver ARM: mvebu: Add Plathome Kirkwood Openblocks A6 board support arch/arm/boards/Makefile | 1 + arch/arm/boards/plathome-openblocks-a6/Makefile | 2 + arch/arm/boards/plathome-openblocks-a6/board.c | 1 + arch/arm/boards/plathome-openblocks-a6/lowlevel.c | 32 +++++ arch/arm/dts/Makefile | 1 + arch/arm/dts/kirkwood-openblocks_a6-bb.dts | 13 ++ arch/arm/mach-mvebu/Kconfig | 3 + drivers/mtd/nand/Kconfig | 7 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/nand_orion.c | 162 ++++++++++++++++++++++ images/Makefile.mvebu | 11 ++ 11 files changed, 234 insertions(+) create mode 100644 arch/arm/boards/plathome-openblocks-a6/Makefile create mode 100644 arch/arm/boards/plathome-openblocks-a6/board.c create mode 100644 arch/arm/boards/plathome-openblocks-a6/lowlevel.c create mode 100644 arch/arm/dts/kirkwood-openblocks_a6-bb.dts create mode 100644 drivers/mtd/nand/nand_orion.c
_______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
