On Tue, Jul 29, 2014 at 01:15:19AM +0400, Antony Pavlov wrote: > Changes since v1: > > * fix reset_cpu(); > * add real Canon A1100 camera support. > > DIGIC is Canon Inc.'s name for a family of SoC > for digital cameras and camcorders. > > See http://en.wikipedia.org/wiki/DIGIC for details. > > There is no publicly available specification for > DIGIC chips. All information about DIGIC chip > internals is based on reverse engineering efforts > made by CHDK (http://chdk.wikia.com) and > Magic Lantern (http://www.magiclantern.fm) projects > contributors. > > Also this patch series adds initial support for Canon > PowerShot A1100 IS compact camera (it is my only camera > with connected UART interface). As the DIGIC-based cameras > differences mostly are unsignificant (e.g. RAM-size, > ROM type and size, GPIO usage) the other compact > and DSLR cameras support can be easely added. > > One can easely run barebox for Canon A1100 using QEMU version 2.0 > or newer. > > This patchseries uses some patches already submitted to maillist: > > * clean barebox.zynq > * treewide: drop Doxygen stuff Applied this series up to 9/11 since I'm quite unsure if it's allowed to include a GPLv3+ tool into a GPLv2 project. There are some ways out of this situation: - Ask the author to relicense it under GPLv2+ - rewrite the tool - Use it as external tool - Convince me that it's allowed ;) Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
