On Fri, Jul 25, 2014 at 04:28:52PM +0100, Renaud Barbier wrote: > This patch set adds support for the Freescale P1010RDB board. > The first patch 1/4 is a resend and fix an issue that prevented > the P1010 from booting. It has also been tested for regression > on other platforms. The remaining patches adds limited > SOC support for the P1010 platform with driver enabled for > the NOR storage device, serial, I2C and Ethernet port. > > Renaud Barbier (4): > ppc: 85xx: CCSRBAR mapping moved to start-up code. > ppc: Freescale P1010 headers > ppc: Freescale P1010 SoC support > ppc: minimal Freescale P1010RDB board support Applied, thanks Sascha > > arch/ppc/Makefile | 1 + > arch/ppc/boards/freescale-p1010rdb/Makefile | 4 + > arch/ppc/boards/freescale-p1010rdb/config.h | 58 +++++ > arch/ppc/boards/freescale-p1010rdb/ddr.c | 60 +++++ > arch/ppc/boards/freescale-p1010rdb/env/bin/init | 2 + > arch/ppc/boards/freescale-p1010rdb/env/config | 2 + > arch/ppc/boards/freescale-p1010rdb/law.c | 24 ++ > arch/ppc/boards/freescale-p1010rdb/p1010rdb.c | 209 ++++++++++++++++ > arch/ppc/boards/freescale-p1010rdb/p1010rdb.h | 14 ++ > arch/ppc/boards/freescale-p1010rdb/tlb.c | 59 +++++ > arch/ppc/configs/p1010rdb_defconfig | 55 +++++ > arch/ppc/cpu-85xx/start.S | 106 ++++++++ > arch/ppc/include/asm/fsl_ifc.h | 267 +++++++++++++++++++++ > arch/ppc/include/asm/fsl_law.h | 1 + > arch/ppc/include/asm/processor.h | 3 +- > arch/ppc/mach-mpc85xx/Kconfig | 69 ++++-- > arch/ppc/mach-mpc85xx/cpu_init.c | 134 +++++++++-- > arch/ppc/mach-mpc85xx/cpuid.c | 1 + > arch/ppc/mach-mpc85xx/fsl_gpio.c | 19 ++ > .../ppc/mach-mpc85xx/include/mach/config_mpc85xx.h | 9 + > arch/ppc/mach-mpc85xx/include/mach/immap_85xx.h | 13 +- > arch/ppc/mach-mpc85xx/speed.c | 38 ++- > 22 files changed, 1091 insertions(+), 57 deletions(-) > create mode 100644 arch/ppc/boards/freescale-p1010rdb/Makefile > create mode 100644 arch/ppc/boards/freescale-p1010rdb/config.h > create mode 100644 arch/ppc/boards/freescale-p1010rdb/ddr.c > create mode 100644 arch/ppc/boards/freescale-p1010rdb/env/bin/init > create mode 100644 arch/ppc/boards/freescale-p1010rdb/env/config > create mode 100644 arch/ppc/boards/freescale-p1010rdb/law.c > create mode 100644 arch/ppc/boards/freescale-p1010rdb/p1010rdb.c > create mode 100644 arch/ppc/boards/freescale-p1010rdb/p1010rdb.h > create mode 100644 arch/ppc/boards/freescale-p1010rdb/tlb.c > create mode 100644 arch/ppc/configs/p1010rdb_defconfig > create mode 100644 arch/ppc/include/asm/fsl_ifc.h > > -- > 1.8.3.1 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
