On Fri, Jul 25, 2014 at 4:40 PM, Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> wrote: > On Fri, Jul 25, 2014 at 9:32 AM, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote: >> On Thu, Jul 24, 2014 at 03:28:40PM +0200, Sebastian Hesselbarth wrote: >>> This patch set adds initial support for xHCI host controllers either >>> as platform_device or PCI attached device. Compared to EHCI, the >>> xHCI added even more SW stuff around the host controller interface >>> we have to deal with. From a topology point-of-view each xHCI HC >>> represents two virtual Root Hubs, one for USB 3.0 and one for USB >>> 2.0 with TT. >>> >>> The xHCI driver currently only supports virtual USB 2.0 ports of the >>> xHCI controller. If a USB 3.0 device is used, it has to be connected >>> with a USB 2.0 cable, i.e. no SuperSpeed cable. Also, I haven't been >>> able to test any USB 1.1 devices, yet. Anyway, I plan to have a look >>> at both USB 1.1 and USB 3.0 but still I consider the driver in a >>> quite good shape to be released. >> >> Do we have the chance to issue a warning when a device is connected >> with a superspeed cable? If not maybe a general warning in the xhci >> probe function is a good idea. > > Sorry, I the reply is f*cked up, have to answer this through gmail. > > I did some improvements and added missing pieces, now all non-SS > combinations I have tested are working, e.g LS/FS/HS on Root Hub, > on Single-TT HS Hub, and on Multi-TT HS Hub. I haven't tested any > Hub-Hub paths, but that is something that can wait IMHO. I just tested SS (with SS cable) on Root Hub and it worked.. but just on one of the both ports Mirabox has. Now I am quite convinced that the inscription on the back of Mirabox above USB ports isn't a typo ;) Both ports are blue, i.e. they should be SS capable. The working one has "USB 3.0" printed above it, the one that does not work has "USB 2.0" printed over it. I thought it was just a typo, I guess it isn't. > I am now going to look at SS issues and if I don't find a quick solution, > I'll put a warning that SS is not supported, yet. I will be quite easy to > catch, as there are distinct virtual USB 3.0 ports on each xHCI, i.e. > if the port reports a device, it is SS with SS-cable on USB 3.0 port. Ok, I admit that error reporting capabilities of the driver could be improved a lot. OTOH, usb core itself isn't very noisy about errors too, it just silently fails. I'll send an updated v2 this weekend or beginning of next week. > BTW, the error path of usb core device detect is utterly broken.. not > that it is important for most cases, but for debugging failing device > connects it is ;) I'll fix it up anytime soon. When I get back to above, I'll also add some more verbose error reporting to xHCI HCD. Sebastian _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
