The following series contains USB Host patches based on the USB
patches sent earlier.
With this series the 'usb' command becomes a rescan command. When
invoked the USB stack will properly detect new devices and remove
old devices.
Also the USB hub support becomes a real driver and the USB device
hierarchy in in devinfo now matches the real USB topology.
Sascha
----------------------------------------------------------------
Antony Pavlov (1):
commands: usb: add tree view capability
Sascha Hauer (11):
USB: i.MX chipidea: Implement OTG support for the poor
USB: host: simplify usb_new_device
USB: host: hub: Turn into a driver
USB: host: fixup USB device hierarchy
USB: host: hub: Use dev_dbg
USB: host: hub: Use usb_hub_power_on from U-Boot
USB: host: factor out port configuration to separate function
USB: host: hub: only configure hub once
USB: host: implement usb_remove_device
USB: host: detect port change only once in usb_hub_configure_port
USB: host: drop force rescan
commands/usb.c | 108 ++++++++-
drivers/usb/core/Makefile | 3 +-
drivers/usb/core/hub.c | 481 +++++++++++++++++++++++++++++++++++++++
drivers/usb/core/hub.h | 7 +
drivers/usb/core/usb.c | 504 ++++-------------------------------------
drivers/usb/core/usb.h | 8 +
drivers/usb/host/ehci-hcd.c | 2 +-
drivers/usb/imx/chipidea-imx.c | 101 ++++++++-
include/usb/chipidea-imx.h | 1 +
include/usb/usb.h | 9 +-
10 files changed, 745 insertions(+), 479 deletions(-)
create mode 100644 drivers/usb/core/hub.c
create mode 100644 drivers/usb/core/hub.h
create mode 100644 drivers/usb/core/usb.h
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
