Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx> --- Documentation/boards/davinci.rst | 51 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/boards/davinci.rst diff --git a/Documentation/boards/davinci.rst b/Documentation/boards/davinci.rst new file mode 100644 index 0000000..a2ddc3c --- /dev/null +++ b/Documentation/boards/davinci.rst @@ -0,0 +1,51 @@ +TI Davinci +========== + +virt2real +--------- + +virt2real is a miniature board for creation of WiFi +or Internet controllable smart devices. + +The board has + + * TI DaVinchi DM365 running at 300 MHz; + * 128 MiB DDR2 SDRAM; + * 256 MiB NAND Flash Memory; + * 2 x UART serial interfaces; + * 1 x Ethernet interface (Micrel KS8851); + * 1 x USB interface; + * microSD card slot. + +The board uses U-Boot as bootloader. + + +Running barebox +^^^^^^^^^^^^^^^ + + 1. Connect to the boards's UART0 (115200 8N1); + Use J2.2 (GND), J2.4 (UART0_TXD), J2.6 (UART0_RXD) pins. + + 2. Turn board's power on; + + 3. Wait for ``Hit any key to stop autoboot`` prompt and press the space key. + + 4. Upload ``barebox.bin`` via Ymodem + +.. code-block:: none + virt2real ># loady +.. + + 5. Run barebox + +.. code-block:: none + virt2real ># go 0x82000000 +.. + + +Links +^^^^^ + + * http://virt2real.com/ + * http://wiki.virt2real.ru/ + * https://github.com/virt2real -- 2.0.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
