Hi Stefan, On Thu, Jun 26, 2014 at 10:58:13PM +0200, Stefan Müller-Klieser wrote: > Dear list, > > I am working on TI's AM335x SoCs and want to add support for the missing > NAND controller features in the driver. As the NAND interface of the > barebox is not in sync with the kernel, it is difficult for me to decide > which way to go. Is there already work going on to update the barebox > NAND driver? I suppose the barebox nand_omap_gpmc is a port of the > u-boot NAND driver. So, should I port the features from the u-boot > driver into barebox, e.g. ELM and HW BCH16 support, or are there > different plans from the maintainer? I have no further plans with nand_omap_gpmc. Note the driver can switch the ecc correction type during runtime. We have to do this since the boot ROM needs a different ecc layout than the rest of the NAND does. I don't want to lose this feature. Other than that feel free to update the driver with new features. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
