On Fri, 9 May 2014 08:20:09 +0200 Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote: > Antony, > > This series is still in my inbox with only one small issue. Will you > update the series? I'll resend the series next week. I'll try to add usb support this weekend. I have some other almost ready series in my queue: * digic series (digic support is in qemu-2.0 now); * switch dir-320 to device tree; * mips cache + ELF-kexec; * pci. > > On Wed, Apr 16, 2014 at 01:57:35PM +0400, Antony Pavlov wrote: > > Research Centre "Module" (RC Module) is > > a Russian development company designing > > mixed-signal ASICs and real-time video-image > > processing systems. > > > > К1879ХБ1Я (AKA K1879HB1YA) is a UEMD family SoC that combines > > a DSP core based on the NeuroMatrix(r) family > > with an ARM architecture CPU ARM1176JZF-S core. > > > > The MB 77.07 is a small (80x80 mm) single-board computer > > developed in Russia by the RC Module. > > It was developed as an educational board for К1879ХБ1Я SoC > > capabilities demonstration. > > > > See http://www.module.ru/en/catalog/micro/micro_pc/ for details. > > > > MB 77.07 barebox HOWTO > > ====================== > > > > 0. Download barebox sources and build barebox.bin image > > > > $ git clone -b next.mb7707.20140416 https://github.com/frantony/barebox barebox.mb7707 > > $ cd barebox.mb7707 > > $ export ARCH=arm > > $ export CROSS_COMPILE=<your_ARM_toolchain_prefix> > > e.g. export CROSS_COMPILE=/opt/arm-2013.11/bin/arm-none-linux-gnueabi- > > $ make module-mb7707_defconfig > > $ make > > > > You will get the 'barebox.bin' file. > > > > > > 1. burn MBOOT bootloader to the board's ROM; > > > > > > 2. Barebox can be started from MBOOT using tftp. > > You have to setup tftp-server on host 192.168.0.1. > > Put your barebox.bin to tftp-server directory > > (usual /tftpboot or /srv/tftp). > > > > Connect your MB 77.07 board to your tftp-server network via > > Ethernet RJ45 connector on the board. > > > > Connect to К1879ХБ1Я's UART (use "SERIAL" connector on the booard) > > using your favorite terminal program. > > > > > > 3. turn on the board, press any key in you terminal program > > to stop autoboot and load barebox.bin image to the board's RAM: > > > > MBOOT # set bootfile barebox.bin > > MBOOT # tftpboot > > greth: greth_halt > > TFTP Using GRETH_10/100 device > > TFTP params: server 192.168.0.1 our_ip 192.168.0.7 > > TFTP params: filename 'barebox.bin' load_address 0x40100000 > > TFTP Loading: ########################## > > TFTP done > > greth: greth_halt > > MBOOT # > > > > > > 4. run barebox > > > > MBOOT # go 0x40100000 > > > > > > Antony Pavlov (5): > > ARM: initial support for RC Module UEMD SoCs > > ARM: uemd: add DEBUG_LL support > > ARM: dts: add minimal К1879ХБ1Я devicetree file > > ARM: uemd: add mb7707 board support > > ARM: uemd: add module-mb7707_defconfig > > > > arch/arm/Kconfig | 6 +++++ > > arch/arm/Makefile | 1 + > > arch/arm/boards/Makefile | 1 + > > arch/arm/boards/module-mb7707/Makefile | 1 + > > arch/arm/boards/module-mb7707/board.c | 27 +++++++++++++++++++ > > arch/arm/boards/module-mb7707/lowlevel.c | 34 +++++++++++++++++++++++ > > arch/arm/configs/module-mb7707_defconfig | 43 ++++++++++++++++++++++++++++++ > > arch/arm/dts/k1879hb1ya.dtsi | 19 +++++++++++++ > > arch/arm/dts/module-mb7707.dts | 16 +++++++++++ > > arch/arm/mach-uemd/Kconfig | 16 +++++++++++ > > arch/arm/mach-uemd/Makefile | 1 + > > arch/arm/mach-uemd/include/mach/debug_ll.h | 41 ++++++++++++++++++++++++++++ > > arch/arm/mach-uemd/reset.c | 24 +++++++++++++++++ > > 13 files changed, 230 insertions(+) > > create mode 100644 arch/arm/boards/module-mb7707/Makefile > > create mode 100644 arch/arm/boards/module-mb7707/board.c > > create mode 100644 arch/arm/boards/module-mb7707/lowlevel.c > > create mode 100644 arch/arm/configs/module-mb7707_defconfig > > create mode 100644 arch/arm/dts/k1879hb1ya.dtsi > > create mode 100644 arch/arm/dts/module-mb7707.dts > > create mode 100644 arch/arm/mach-uemd/Kconfig > > create mode 100644 arch/arm/mach-uemd/Makefile > > create mode 100644 arch/arm/mach-uemd/include/mach/debug_ll.h > > create mode 100644 arch/arm/mach-uemd/reset.c > > > > -- > > 1.9.0 > > > > > > _______________________________________________ > > barebox mailing list > > barebox@xxxxxxxxxxxxxxxxxxx > > http://lists.infradead.org/mailman/listinfo/barebox > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- -- Best regards, Antony Pavlov _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
