Hi, while building current Barebox, with out-of-tree make parameter O=, there is an error which leads to lack of environment in final image. The build process itself falsely doesn't get interrupted. make -j$(nproc) ARCH=arm CROSS_COMPILE=arm-cortexa8-linux-gnueabihf- O=../o_beagle omap3530_beagle_defconfig make -j$(nproc) ARCH=arm CROSS_COMPILE=arm-cortexa8-linux-gnueabihf- O=../o_beagle CC drivers/of/mem_generic.o ENV defaultenv/barebox_default_env CC drivers/of/partition.o cp: target `defaultenv/barebox_default_env.genenv.tmp' is not a directory ENV defaultenv/defaultenv-2-base.bbenv CC commands/automount.o cp: target `defaultenv/defaultenv-2-base.bbenv.genenv.tmp' is not a directory CC commands/global.o in contrast to: make -j$(nproc) ARCH=arm CROSS_COMPILE=arm-cortexa8-linux-gnueabihf- omap3530_beagle_defconfig make -j$(nproc) ARCH=arm CROSS_COMPILE=arm-cortexa8-linux-gnueabihf- AS arch/arm/lib/memcpy.o LD arch/arm/mach-omap/built-in.o ENV defaultenv/defaultenv-2-base.bbenv PBLLD arch/arm/mach-omap/built-in-pbl.o CC drivers/usb/core/usb.o ENVH defaultenv/barebox_default_env.h I haven't done bisecting, but barebox-2013.07 is fine. Any ideas? Thanks -- Christoph _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
