Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- arch/arm/dts/imx27.dtsi | 553 +----------------------------------------------- 1 file changed, 1 insertion(+), 552 deletions(-) diff --git a/arch/arm/dts/imx27.dtsi b/arch/arm/dts/imx27.dtsi index 83a8247..49a0ddf 100644 --- a/arch/arm/dts/imx27.dtsi +++ b/arch/arm/dts/imx27.dtsi @@ -8,555 +8,4 @@ * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ - -#include "skeleton.dtsi" -#include "imx27-pinfunc.h" -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> - -/ { - aliases { - ethernet0 = &fec; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; - gpio5 = &gpio6; - i2c0 = &i2c1; - i2c1 = &i2c2; - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; - serial5 = &uart6; - spi0 = &cspi1; - spi1 = &cspi2; - spi2 = &cspi3; - }; - - aitc: aitc-interrupt-controller@e0000000 { - compatible = "fsl,imx27-aitc", "fsl,avic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x10040000 0x1000>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - osc26m { - compatible = "fsl,imx-osc26m", "fixed-clock"; - clock-frequency = <26000000>; - }; - }; - - cpus { - #size-cells = <0>; - #address-cells = <1>; - - cpu: cpu@0 { - device_type = "cpu"; - compatible = "arm,arm926ej-s"; - operating-points = < - /* kHz uV */ - 266000 1300000 - 399000 1450000 - >; - clock-latency = <62500>; - clocks = <&clks 18>; - voltage-tolerance = <5>; - }; - }; - - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks 75>; - clock-names = "main_clk"; - }; - - usbphy2: usbphy@2 { - compatible = "usb-nop-xceiv"; - reg = <2>; - clocks = <&clks 75>; - clock-names = "main_clk"; - }; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&aitc>; - ranges; - - aipi@10000000 { /* AIPI1 */ - compatible = "fsl,aipi-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x10000000 0x20000>; - ranges; - - dma: dma@10001000 { - compatible = "fsl,imx27-dma"; - reg = <0x10001000 0x1000>; - interrupts = <32>; - clocks = <&clks 50>, <&clks 70>; - clock-names = "ipg", "ahb"; - #dma-cells = <1>; - #dma-channels = <16>; - }; - - wdog: wdog@10002000 { - compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; - reg = <0x10002000 0x1000>; - interrupts = <27>; - clocks = <&clks 74>; - }; - - gpt1: timer@10003000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; - reg = <0x10003000 0x1000>; - interrupts = <26>; - clocks = <&clks 46>, <&clks 61>; - clock-names = "ipg", "per"; - }; - - gpt2: timer@10004000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; - reg = <0x10004000 0x1000>; - interrupts = <25>; - clocks = <&clks 45>, <&clks 61>; - clock-names = "ipg", "per"; - }; - - gpt3: timer@10005000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; - reg = <0x10005000 0x1000>; - interrupts = <24>; - clocks = <&clks 44>, <&clks 61>; - clock-names = "ipg", "per"; - }; - - pwm: pwm@10006000 { - #pwm-cells = <2>; - compatible = "fsl,imx27-pwm"; - reg = <0x10006000 0x1000>; - interrupts = <23>; - clocks = <&clks 34>, <&clks 61>; - clock-names = "ipg", "per"; - }; - - kpp: kpp@10008000 { - compatible = "fsl,imx27-kpp", "fsl,imx21-kpp"; - reg = <0x10008000 0x1000>; - interrupts = <21>; - clocks = <&clks 37>; - status = "disabled"; - }; - - owire: owire@10009000 { - compatible = "fsl,imx27-owire", "fsl,imx21-owire"; - reg = <0x10009000 0x1000>; - clocks = <&clks 35>; - status = "disabled"; - }; - - uart1: serial@1000a000 { - compatible = "fsl,imx27-uart", "fsl,imx21-uart"; - reg = <0x1000a000 0x1000>; - interrupts = <20>; - clocks = <&clks 81>, <&clks 61>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart2: serial@1000b000 { - compatible = "fsl,imx27-uart", "fsl,imx21-uart"; - reg = <0x1000b000 0x1000>; - interrupts = <19>; - clocks = <&clks 80>, <&clks 61>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart3: serial@1000c000 { - compatible = "fsl,imx27-uart", "fsl,imx21-uart"; - reg = <0x1000c000 0x1000>; - interrupts = <18>; - clocks = <&clks 79>, <&clks 61>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart4: serial@1000d000 { - compatible = "fsl,imx27-uart", "fsl,imx21-uart"; - reg = <0x1000d000 0x1000>; - interrupts = <17>; - clocks = <&clks 78>, <&clks 61>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - cspi1: cspi@1000e000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx27-cspi"; - reg = <0x1000e000 0x1000>; - interrupts = <16>; - clocks = <&clks 53>, <&clks 60>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - cspi2: cspi@1000f000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx27-cspi"; - reg = <0x1000f000 0x1000>; - interrupts = <15>; - clocks = <&clks 52>, <&clks 60>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - ssi1: ssi@10010000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; - reg = <0x10010000 0x1000>; - interrupts = <14>; - clocks = <&clks 26>; - dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>; - dma-names = "rx0", "tx0", "rx1", "tx1"; - fsl,fifo-depth = <8>; - status = "disabled"; - }; - - ssi2: ssi@10011000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; - reg = <0x10011000 0x1000>; - interrupts = <13>; - clocks = <&clks 25>; - dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>; - dma-names = "rx0", "tx0", "rx1", "tx1"; - fsl,fifo-depth = <8>; - status = "disabled"; - }; - - i2c1: i2c@10012000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; - reg = <0x10012000 0x1000>; - interrupts = <12>; - clocks = <&clks 40>; - status = "disabled"; - }; - - sdhci1: sdhci@10013000 { - compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; - reg = <0x10013000 0x1000>; - interrupts = <11>; - clocks = <&clks 30>, <&clks 60>; - clock-names = "ipg", "per"; - dmas = <&dma 7>; - dma-names = "rx-tx"; - status = "disabled"; - }; - - sdhci2: sdhci@10014000 { - compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; - reg = <0x10014000 0x1000>; - interrupts = <10>; - clocks = <&clks 29>, <&clks 60>; - clock-names = "ipg", "per"; - dmas = <&dma 6>; - dma-names = "rx-tx"; - status = "disabled"; - }; - - iomuxc: iomuxc@10015000 { - compatible = "fsl,imx27-iomuxc"; - reg = <0x10015000 0x600>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio1: gpio@10015000 { - compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; - reg = <0x10015000 0x100>; - interrupts = <8>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@10015100 { - compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; - reg = <0x10015100 0x100>; - interrupts = <8>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@10015200 { - compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; - reg = <0x10015200 0x100>; - interrupts = <8>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@10015300 { - compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; - reg = <0x10015300 0x100>; - interrupts = <8>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@10015400 { - compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; - reg = <0x10015400 0x100>; - interrupts = <8>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@10015500 { - compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; - reg = <0x10015500 0x100>; - interrupts = <8>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - audmux: audmux@10016000 { - compatible = "fsl,imx27-audmux", "fsl,imx21-audmux"; - reg = <0x10016000 0x1000>; - clocks = <&clks 0>; - clock-names = "audmux"; - status = "disabled"; - }; - - cspi3: cspi@10017000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx27-cspi"; - reg = <0x10017000 0x1000>; - interrupts = <6>; - clocks = <&clks 51>, <&clks 60>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - gpt4: timer@10019000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; - reg = <0x10019000 0x1000>; - interrupts = <4>; - clocks = <&clks 43>, <&clks 61>; - clock-names = "ipg", "per"; - }; - - gpt5: timer@1001a000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; - reg = <0x1001a000 0x1000>; - interrupts = <3>; - clocks = <&clks 42>, <&clks 61>; - clock-names = "ipg", "per"; - }; - - uart5: serial@1001b000 { - compatible = "fsl,imx27-uart", "fsl,imx21-uart"; - reg = <0x1001b000 0x1000>; - interrupts = <49>; - clocks = <&clks 77>, <&clks 61>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart6: serial@1001c000 { - compatible = "fsl,imx27-uart", "fsl,imx21-uart"; - reg = <0x1001c000 0x1000>; - interrupts = <48>; - clocks = <&clks 78>, <&clks 61>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - i2c2: i2c@1001d000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; - reg = <0x1001d000 0x1000>; - interrupts = <1>; - clocks = <&clks 39>; - status = "disabled"; - }; - - sdhci3: sdhci@1001e000 { - compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; - reg = <0x1001e000 0x1000>; - interrupts = <9>; - clocks = <&clks 28>, <&clks 60>; - clock-names = "ipg", "per"; - dmas = <&dma 36>; - dma-names = "rx-tx"; - status = "disabled"; - }; - - gpt6: timer@1001f000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; - reg = <0x1001f000 0x1000>; - interrupts = <2>; - clocks = <&clks 41>, <&clks 61>; - clock-names = "ipg", "per"; - }; - }; - - aipi@10020000 { /* AIPI2 */ - compatible = "fsl,aipi-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x10020000 0x20000>; - ranges; - - fb: fb@10021000 { - compatible = "fsl,imx27-fb", "fsl,imx21-fb"; - interrupts = <61>; - reg = <0x10021000 0x1000>; - clocks = <&clks 36>, <&clks 65>, <&clks 59>; - clock-names = "ipg", "ahb", "per"; - status = "disabled"; - }; - - coda: coda@10023000 { - compatible = "fsl,imx27-vpu"; - reg = <0x10023000 0x0200>; - interrupts = <53>; - clocks = <&clks 57>, <&clks 66>; - clock-names = "per", "ahb"; - iram = <&iram>; - }; - - usbotg: usb@10024000 { - compatible = "fsl,imx27-usb"; - reg = <0x10024000 0x200>; - interrupts = <56>; - clocks = <&clks 15>; - fsl,usbmisc = <&usbmisc 0>; - fsl,usbphy = <&usbphy0>; - status = "disabled"; - }; - - usbh1: usb@10024200 { - compatible = "fsl,imx27-usb"; - reg = <0x10024200 0x200>; - interrupts = <54>; - clocks = <&clks 15>; - fsl,usbmisc = <&usbmisc 1>; - status = "disabled"; - }; - - usbh2: usb@10024400 { - compatible = "fsl,imx27-usb"; - reg = <0x10024400 0x200>; - interrupts = <55>; - clocks = <&clks 15>; - fsl,usbmisc = <&usbmisc 2>; - fsl,usbphy = <&usbphy2>; - status = "disabled"; - }; - - usbmisc: usbmisc@10024600 { - #index-cells = <1>; - compatible = "fsl,imx27-usbmisc"; - reg = <0x10024600 0x200>; - clocks = <&clks 62>; - }; - - sahara2: sahara@10025000 { - compatible = "fsl,imx27-sahara"; - reg = <0x10025000 0x1000>; - interrupts = <59>; - clocks = <&clks 32>, <&clks 64>; - clock-names = "ipg", "ahb"; - }; - - clks: ccm@10027000{ - compatible = "fsl,imx27-ccm"; - reg = <0x10027000 0x1000>; - #clock-cells = <1>; - }; - - iim: iim@10028000 { - compatible = "fsl,imx27-iim"; - reg = <0x10028000 0x1000>; - interrupts = <62>; - clocks = <&clks 38>; - }; - - fec: ethernet@1002b000 { - compatible = "fsl,imx27-fec"; - reg = <0x1002b000 0x4000>; - interrupts = <50>; - clocks = <&clks 48>, <&clks 67>; - clock-names = "ipg", "ahb"; - status = "disabled"; - }; - }; - - nfc: nand@d8000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,imx27-nand"; - reg = <0xd8000000 0x1000>; - interrupts = <29>; - clocks = <&clks 54>; - status = "disabled"; - }; - - weim: weim@d8002000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,imx27-weim"; - reg = <0xd8002000 0x1000>; - clocks = <&clks 0>; - ranges = < - 0 0 0xc0000000 0x08000000 - 1 0 0xc8000000 0x08000000 - 2 0 0xd0000000 0x02000000 - 3 0 0xd2000000 0x02000000 - 4 0 0xd4000000 0x02000000 - 5 0 0xd6000000 0x02000000 - >; - status = "disabled"; - }; - - iram: iram@ffff4c00 { - compatible = "mmio-sram"; - reg = <0xffff4c00 0xb400>; - }; - }; -}; +#include <arm/imx27.dtsi> -- 1.9.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
