Hi Christian,
On Fri, Apr 25, 2014 at 01:54:28PM +0200, Christian Hemp wrote:
> Add support for Phytec phyCARD-i.MX6.
> - 1GB RAM on two banks
> - 1GB RAM on one bank
> - 2GB RAM on two banks
>
> +
> diff --git a/arch/arm/boards/phytec-phycard-imx6/env/boot/net b/arch/arm/boards/phytec-phycard-imx6/env/boot/net
> new file mode 100644
> index 0000000..8fe65d7
> --- /dev/null
> +++ b/arch/arm/boards/phytec-phycard-imx6/env/boot/net
> @@ -0,0 +1,14 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + boot-menu-add-entry "$0" "network (Kernel:tftp;rootf:nfs)"
> + exit
> +fi
> +
> +path="/mnt/tftp"
> +
> +global.bootm.image="${path}/linuximage"
> +#global.bootm.oftree="${path}/${global.user}-oftree-${global.hostname}"
> +nfsroot="/home/${global.user}/nfsroot/${global.hostname}"
> +bootargs-ip
> +global.linux.bootargs.dyn.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp"
What's wrong with the already existing entry in
defaultenv/defaultenv-2-base/boot/net?
> diff --git a/arch/arm/boards/phytec-phycard-imx6/env/network/eth0 b/arch/arm/boards/phytec-phycard-imx6/env/network/eth0
> new file mode 100644
> index 0000000..03dcca0
> --- /dev/null
> +++ b/arch/arm/boards/phytec-phycard-imx6/env/network/eth0
> @@ -0,0 +1,16 @@
> +#!/bin/sh
> +
> +# ip setting (static/dhcp)
> +ip=static
> +global.dhcp.vendor_id=barebox-${global.hostname}
> +
> +# static setup used if ip=static
> +ipaddr=192.168.3.11
> +netmask=255.255.255.0
> +gateway=192.168.3.10
> +serverip=192.168.3.10
No ip addresses in the defaultenv please.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
