Hi Lukasz and Uwe, > Lucas Stach <dev@xxxxxxxxxx> hat am 21. April 2014 um 17:24 geschrieben: > > > Am Mittwoch, den 16.04.2014, 22:02 +0200 schrieb Uwe Kleine-König: > > On Wed, Apr 16, 2014 at 05:35:52PM +0200, Lucas Stach wrote: > > > Hi Rolf, > > > > > > Am Dienstag, den 15.04.2014, 13:28 +0200 schrieb Rolf Evers-Fischer: > > > > Dear all, > > > > after update to barebox-2014.03.0, the kernel on my beaglebone-white > > > > doesn't > > > > start anymore. > > > > The last line, which appears, is "booting kernel with devicetree". > > > > I discovered that the problem is caused by the commit [1]. When I revert > > > > this > > > > commit, everything works fine. > > > > > > > > Here is some more info, which I gathered with additional printfs: > > > > Without this commit, the '__do_bootm_linux()' function is called with > > > > data->initrd_address = 0xffffffff > > > > data->os_res->start = 0x80008000 > > > > data->os_entry = 0 > > > > swap = 0 > > > > Finally it invokes the 'start_linux()' function with > > > > kernel = 0x80008000 > > > > swap = 0 > > > > initrd_start = 0x80808000 > > > > initrd_size = 0 > > > > data->oftree = 0x8b1e0000 > > > > > > > > With this commit (i.e. when the kernel doesn't start), the > > > > '__do_bootm_linux()' > > > > function is called with the same parameters as above plus > > > > free_mem = 0x8041f000 > > > > It invokes the 'start_linux()' function with > > > > kernel = 0x80008000 > > > > swap = 0 > > > > initrd_start = 0x8041f000 > > > > initrd_size = 0 > > > > data->oftree = 0x8041f000 > > > > > > > > Do you have any idea, how to fix this problem? For now I will continue > > > > using > > > > barebox-2014.03.0 without the problematic commit. > > > > > > > > [1] http://www.spinics.net/lists/u-boot-v2/msg17345.html > > > > "ARM: bootm: pass free memory to __do_bootm_linux" > > > > > > I think you are trying to boot a uImage. Is this right? > > > Yes, I've tried to boot a uImage. > > > Could you please test with a zImage? If it still fails, can you try the > > > following patch? > > > > > > --------------------------------->8------------------------------------------ > > > From 6e51388bda025508b28d723960055656fa50784d Mon Sep 17 00:00:00 2001 > > > From: Lucas Stach <l.stach@xxxxxxxxxxxxxx> > > > Date: Wed, 16 Apr 2014 17:23:33 +0200 > > > Subject: [PATCH] ARM: bootm: be more clever while deciding where to put > > > zImage > > > > > > For small systems we would put the zImage at 8MiB after > > > the start of memory, and put the DT a bit after the zImage. > > > When we encounter an image which is bigger than 8MiB > > > uncompressed, the kernel would try to relocate itself > > > and overwrite the DT. > > > > > > Try to be more clever at zImage placement to avoid > > > triggering the kernel relocation. > > > > > > Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> > > > --- > > > arch/arm/lib/bootm.c | 31 ++++++++++++++----------------- > > > 1 file changed, 14 insertions(+), 17 deletions(-) > > > > > > diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c > > > index c63cbc02e35f..2d4b18b7f794 100644 > > > --- a/arch/arm/lib/bootm.c > > > +++ b/arch/arm/lib/bootm.c > > > @@ -245,23 +245,6 @@ static int do_bootz_linux(struct image_data *data) > > > if (ret) > > > return ret; > > > > > > - if (load_address == UIMAGE_INVALID_ADDRESS) { > > > - /* > > > - * The kernel should stay in the first 128MiB of RAM, recommended > > > - * is 32MiB into RAM so that relocation prior to decompression > > > - * can be avoided. > > > - */ > > > - if (mem_size > SZ_64M) > > > - data->os_address = mem_start + SZ_32M; > > > - else > > > - data->os_address = mem_start + SZ_8M; > > > - > > > - load_address = data->os_address; > > > - if (bootm_verbose(data)) > > > - printf("no os load address, defaulting to 0x%08lx\n", > > > - load_address); > > > - } > > > - > > > fd = open(data->os_file, O_RDONLY); > > > if (fd < 0) { > > > perror("open"); > > > @@ -292,6 +275,20 @@ static int do_bootz_linux(struct image_data *data) > > > if (swap) > > > end = swab32(end); > > > > > > + if (load_address == UIMAGE_INVALID_ADDRESS) { > > > + /* > > > + * Just use a conservative default of 4 times the size of the > > > + * compressed image, to avoid the need for the kernel to reocate itself > > s/reocate/relocate/ > > > Thanks, will fix this. > > > > + * before decompression. > > > + */ > > > + data->os_address = mem_start + PAGE_ALIGN(end * 4); > > I'm not sure if that really matters, but end isn't necessarily[1] holding > > the size of the compressed image. Even if it doesn't matter, using > > > > + data->os_address = mem_start + PAGE_ALIGN((end - start) * 4); > > > > is more clear here. > > > Right, I've also noticed this. But this error is is spread in a few more > places, so I'll cook another patch for this. > > Regards, > Lucas > Thank you for your suggestions. If you don't mind, I'll wait for another patch and try booting a zImage (with and without the upcoming patch). Kind regards, Rolf _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
