Hi Eric, On Wed, Mar 26, 2014 at 09:22:42PM +0100, Eric Bénard wrote: > +} > +postcore_initcall(marsboard_lwl_init); > diff --git a/arch/arm/boards/embest-marsboard/env/config-board b/arch/arm/boards/embest-marsboard/env/config-board > new file mode 100644 > index 0000000..e8e8378 > --- /dev/null > +++ b/arch/arm/boards/embest-marsboard/env/config-board > @@ -0,0 +1,6 @@ > +#!/bin/sh > + > +# board defaults, do not change in running system. Change /env/config > +# instead > + > +global.linux.bootargs.base="console=ttymxc0,115200" For the board specific environment I'd like to do the following: move the $BOARD/env directory to a board specific name, like $BOARD/marsboard-env. In your board code (when you know that you're running on the marsboard), do: defaultenv_append_directory(marsboard_env); For the environment snippet above: You can simply drop it. barebox will append a correct 'console=' parameter automatically for you. > +wm 32 0x020c407c 0x0f0000c3 > +wm 32 0x020c4080 0x000003ff > +/* enable AXI cache for VDOA/VPU/IPU */ > +wm 32 0x020e0010 0xf00000cf > +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7 */ > +wm 32 0x020e0018 0x007f007f > +wm 32 0x020e001c 0x007f007f You can probably drop these. The -next branch has a patch in it which should do it: 3739b84 ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
