[PATCH 2/3] x86: Add support for IDE on the legacy I/O ports

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



---
 arch/x86/boards/x86_generic/generic_pc.c | 71 ++++++++++++++++++++++++
drivers/ata/ide-sff.c | 94 ++++++++++++++++++++++++++------
 drivers/ata/intf_platform_ide.c          | 14 ++++-
 include/ata_drive.h                      |  1 +
 4 files changed, 161 insertions(+), 19 deletions(-)

diff --git a/arch/x86/boards/x86_generic/generic_pc.c b/arch/x86/boards/x86_generic/generic_pc.c
index 74a7224..6152afc 100644
--- a/arch/x86/boards/x86_generic/generic_pc.c
+++ b/arch/x86/boards/x86_generic/generic_pc.c
@@ -27,6 +27,10 @@
 #include <ns16550.h>
 #include <linux/err.h>
 +#ifdef CONFIG_DISK_INTF_PLATFORM_IDE
+#include <platform_ide.h>
+#endif
+
 /*
  * These datas are from the MBR, created by the linker and filled by the
  * setup tool while installing barebox on the disk drive
@@ -41,6 +45,55 @@ extern uint8_t pers_env_drive;
  */
 #define PATCH_AREA_PERS_SIZE_UNUSED 0x000
 +#ifdef CONFIG_DISK_INTF_PLATFORM_IDE
+
+static struct ide_port_info ide_plat = {
+	.ioport_shift = 0,
+	.dataif_be = 0,
+};
+
+static struct resource primary_ide_resources[] = {
+	{
+		.name = "base",
+		.start = 0x1f0,
+		.end =  0x1f8,
+		.flags = IORESOURCE_IO
+	},
+	{
+		.name = "alt",
+		.start = 0x3f6,
+		.end =  0x3f8,
+		.flags = IORESOURCE_IO
+	}
+};
+
+static struct resource secondary_ide_resources[] = {
+	{
+		.name = "base",
+		.start = 0x170,
+		.end =  0x177,
+		.flags = IORESOURCE_IO
+	},
+};
+
+static struct device_d primary_ide_device = {
+	.name = "ide_intf",
+	.id = 0,
+	.platform_data = &ide_plat,
+	.resource = primary_ide_resources,
+	.num_resources = ARRAY_SIZE( primary_ide_resources ),
+};
+
+static struct device_d secondary_ide_device = {
+	.name = "ide_intf",
+	.id = 1,
+	.platform_data = &ide_plat,
+	.resource = secondary_ide_resources,
+	.num_resources = ARRAY_SIZE( secondary_ide_resources ),
+};
+
+#endif /* CONFIG_DISK_INTF_PLATFORM_IDE */
+
 static int devices_init(void)
 {
 	struct cdev *cdev;
@@ -48,9 +101,26 @@ static int devices_init(void)
 	/* extended memory only */
 	add_mem_device("ram0", 0x0, bios_get_memsize() << 10,
 		       IORESOURCE_MEM_WRITEABLE);
+#ifdef CONFIG_DISK_BIOS
add_generic_device("biosdrive", DEVICE_ID_DYNAMIC, NULL, 0, 0, IORESOURCE_MEM,
 			NULL);
+#endif
+
+#ifdef CONFIG_DISK_INTF_PLATFORM_IDE
+	platform_device_register( &primary_ide_device );
+	platform_device_register( &secondary_ide_device );
+
+	if (pers_env_size != PATCH_AREA_PERS_SIZE_UNUSED) {
+		cdev = devfs_add_partition("ata0",
+				pers_env_storage * 512,
+				(unsigned)pers_env_size * 512,
+				DEVFS_PARTITION_FIXED, "env0");
+		printf("Partition: %ld\n", IS_ERR(cdev) ? PTR_ERR(cdev) : 0);
+	} else
+		printf("No persistent storage defined\n");
+#endif /* CONFIG_DISK_INTF_PLATFORM_IDE */
 +#ifdef CONFIG_DISK_BIOS
 	if (pers_env_size != PATCH_AREA_PERS_SIZE_UNUSED) {
 		cdev = devfs_add_partition("biosdisk0",
 				pers_env_storage * 512,
@@ -59,6 +129,7 @@ static int devices_init(void)
 		printf("Partition: %ld\n", IS_ERR(cdev) ? PTR_ERR(cdev) : 0);
 	} else
 		printf("No persistent storage defined\n");
+#endif
          return 0;
 }
diff --git a/drivers/ata/ide-sff.c b/drivers/ata/ide-sff.c
index 3d5932e..809a129 100644
--- a/drivers/ata/ide-sff.c
+++ b/drivers/ata/ide-sff.c
@@ -15,13 +15,71 @@
 #define DISK_SLAVE 1
  /**
+ * Read a byte from the ATA controller
+ * @param ide IDE port structure
+ * @param addr Register adress
+ * @return Register's content
+ */
+static inline uint8_t ata_rd_byte(struct ide_port *ide, void __iomem *addr )
+{
+	if (!ide->io.mmio)
+		return (uint8_t) inb((int) addr);
+	else
+		return readb(addr);
+}
+
+/**
+ * Write a byte to the ATA controller
+ * @param ide IDE port structure
+ * @param value Value to write
+ * @param addr Register adress
+ * @return Register's content
+ */
+static inline void ata_wr_byte(struct ide_port *ide, uint8_t value, void __iomem *addr )
+{
+	if (!ide->io.mmio)
+		outb(value, (int) addr);
+	else
+		writeb(value,addr);
+}
+
+/**
+ * Read a word from the ATA controller
+ * @param ide IDE port structure
+ * @param addr Register adress
+ * @return Register's content
+ */
+static inline uint16_t ata_rd_word(struct ide_port *ide, void __iomem *addr )
+{
+	if (!ide->io.mmio)
+		return (uint16_t) inw((int) addr);
+	else
+		return readw(addr);
+}
+
+/**
+ * Write a word to the ATA controller
+ * @param ide IDE port structure
+ * @param value Value to write
+ * @param addr Register adress
+ * @return Register's content
+ */
+static inline void ata_wr_word(struct ide_port *ide, uint16_t value, void __iomem *addr )
+{
+	if (!ide->io.mmio)
+		outw(value, (int) addr);
+	else
+		writew(value,addr);
+}
+
+/**
  * Read the status register of the ATA drive
  * @param io Register file
  * @return Register's content
  */
 static uint8_t ata_rd_status(struct ide_port *ide)
 {
-	return readb(ide->io.status_addr);
+	return ata_rd_byte(ide,ide->io.status_addr);
 }
  /**
@@ -83,12 +141,12 @@ static int ata_set_lba_sector(struct ide_port *ide, unsigned drive, uint64_t num
 	if (num > 0x0FFFFFFF || drive > 1)
 		return -EINVAL;
 -	writeb(0xA0 | LBA_FLAG | drive << 4 | num >> 24, ide->io.device_addr);
-	writeb(0x00, ide->io.error_addr);
-	writeb(0x01, ide->io.nsect_addr);
-	writeb(num, ide->io.lbal_addr);	/* 0 ... 7 */
-	writeb(num >> 8, ide->io.lbam_addr); /* 8 ... 15 */
-	writeb(num >> 16, ide->io.lbah_addr); /* 16 ... 23 */
+ ata_wr_byte(ide, 0xA0 | LBA_FLAG | drive << 4 | num >> 24, ide->io.device_addr);
+	ata_wr_byte(ide, 0x00, ide->io.error_addr);
+	ata_wr_byte(ide, 0x01, ide->io.nsect_addr);
+	ata_wr_byte(ide, num, ide->io.lbal_addr);	/* 0 ... 7 */
+	ata_wr_byte(ide, num >> 8, ide->io.lbam_addr); /* 8 ... 15 */
+	ata_wr_byte(ide, num >> 16, ide->io.lbah_addr); /* 16 ... 23 */
  	return 0;
 }
@@ -107,7 +165,7 @@ static int ata_wr_cmd(struct ide_port *ide, uint8_t cmd)
 	if (rc != 0)
 		return rc;
 -	writeb(cmd, ide->io.command_addr);
+	ata_wr_byte(ide, cmd, ide->io.command_addr);
 	return 0;
 }
@@ -118,7 +176,7 @@ static int ata_wr_cmd(struct ide_port *ide, uint8_t cmd)
  */
 static void ata_wr_dev_ctrl(struct ide_port *ide, uint8_t val)
 {
-	writeb(val, ide->io.ctl_addr);
+	ata_wr_byte(ide, val, ide->io.ctl_addr);
 }
  /**
@@ -133,10 +191,10 @@ static void ata_rd_sector(struct ide_port *ide, void *buf)
  	if (ide->io.dataif_be) {
 		for (; u > 0; u--)
-			*b++ = be16_to_cpu(readw(ide->io.data_addr));
+			*b++ = be16_to_cpu(ata_rd_word(ide, ide->io.data_addr));
 	} else {
 		for (; u > 0; u--)
-			*b++ = le16_to_cpu(readw(ide->io.data_addr));
+			*b++ = le16_to_cpu(ata_rd_word(ide, ide->io.data_addr));
 	}
 }
@@ -152,10 +210,10 @@ static void ata_wr_sector(struct ide_port *ide, const void *buf)
  	if (ide->io.dataif_be) {
 		for (; u > 0; u--)
-			writew(cpu_to_be16(*b++), ide->io.data_addr);
+			ata_wr_word(ide, cpu_to_be16(*b++), ide->io.data_addr);
 	} else {
 		for (; u > 0; u--)
-			writew(cpu_to_le16(*b++), ide->io.data_addr);
+			ata_wr_word(ide, cpu_to_le16(*b++), ide->io.data_addr);
 	}
 }
@@ -169,10 +227,10 @@ static int ide_read_id(struct ata_port *port, void *buf)
 	struct ide_port *ide = to_ata_drive_access(port);
 	int rc;
 -	writeb(0xA0, ide->io.device_addr);	/* FIXME drive */
-	writeb(0x00, ide->io.lbal_addr);
-	writeb(0x00, ide->io.lbam_addr);
-	writeb(0x00, ide->io.lbah_addr);
+	ata_wr_byte(ide, 0xA0, ide->io.device_addr);	/* FIXME drive */
+	ata_wr_byte(ide, 0x00, ide->io.lbal_addr);
+	ata_wr_byte(ide, 0x00, ide->io.lbam_addr);
+	ata_wr_byte(ide, 0x00, ide->io.lbah_addr);
  	rc = ata_wr_cmd(ide, ATA_CMD_ID_ATA);
 	if (rc != 0)
@@ -327,6 +385,8 @@ int ide_port_register(struct ide_port *ide)
 	ide->port.ops = &ide_ops;
  	ret = ata_port_register(&ide->port);
+	if ( !ret )
+		ata_port_detect(&ide->port);
  	if (ret)
 		free(ide);
diff --git a/drivers/ata/intf_platform_ide.c b/drivers/ata/intf_platform_ide.c
index 8ae0f05..24f78f4 100644
--- a/drivers/ata/intf_platform_ide.c
+++ b/drivers/ata/intf_platform_ide.c
@@ -89,8 +89,18 @@ static int platform_ide_probe(struct device_d *dev)
 	}
  	ide = xzalloc(sizeof(*ide));
-	reg_base = dev_request_mem_region(dev, 0);
-	alt_base = dev_request_mem_region(dev, 1);
+	reg_base = dev_request_region(dev, 0, IORESOURCE_MEM);
+	if (reg_base != NULL)
+	{
+		alt_base = dev_request_region(dev, 1, IORESOURCE_MEM);
+		ide->io.mmio = 1;
+	}
+	else
+	{
+		reg_base = dev_request_region(dev, 0, IORESOURCE_IO);
+		alt_base = dev_request_region(dev, 1, IORESOURCE_IO);
+	}
+
platform_ide_setup_port(reg_base, alt_base, &ide->io, pdata->ioport_shift);
 	ide->io.reset = pdata->reset;
 	ide->io.dataif_be = pdata->dataif_be;
diff --git a/include/ata_drive.h b/include/ata_drive.h
index 6d6cca4..44073cb 100644
--- a/include/ata_drive.h
+++ b/include/ata_drive.h
@@ -119,6 +119,7 @@ struct ata_ioports {
 	/* hard reset line handling */
 	void (*reset)(int);	/* true: assert reset, false: de-assert reset */
 	int dataif_be;	/* true if 16 bit data register is big endian */
+	int mmio; /* true if memory-mapped io */
 };
  struct ata_port;
--
1.8.4


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox




[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux