We use dts for serial port initialization,
so we have no need in mach-xburst/serial.c anymore.
Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx>
---
arch/mips/mach-xburst/Makefile | 1 -
arch/mips/mach-xburst/serial.c | 60 ------------------------------------------
2 files changed, 61 deletions(-)
diff --git a/arch/mips/mach-xburst/Makefile b/arch/mips/mach-xburst/Makefile
index 3e0cd73..e5634ba 100644
--- a/arch/mips/mach-xburst/Makefile
+++ b/arch/mips/mach-xburst/Makefile
@@ -1,2 +1 @@
-obj-y += serial.o
obj-$(CONFIG_CPU_JZ4755) += csrc-jz4750.o reset-jz4750.o
diff --git a/arch/mips/mach-xburst/serial.c b/arch/mips/mach-xburst/serial.c
deleted file mode 100644
index acf5648..0000000
--- a/arch/mips/mach-xburst/serial.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2013 Antony Pavlov <antonynpavlov@xxxxxxxxx>
- *
- * Based on the linux kernel JZ4740 serial support:
- * Copyright (C) 2010, Lars-Peter Clausen <lars@xxxxxxxxxx>
- *
- * This file is part of barebox.
- * See file CREDITS for list of people who contributed to this project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <common.h>
-#include <ns16550.h>
-#include <io.h>
-#include <mach/devices.h>
-
-#define JZ_UART_SHIFT 2
-
-#define ier (1 << JZ_UART_SHIFT)
-#define fcr (2 << JZ_UART_SHIFT)
-
-static void jz_serial_reg_write(unsigned int val, unsigned long base,
- unsigned char reg_offset)
-{
- switch (reg_offset) {
- case fcr:
- val |= 0x10; /* Enable uart module */
- break;
- case ier:
- val |= (val & 0x4) << 2;
- break;
- default:
- break;
- }
-
- writeb(val & 0xff, (void *)(base + reg_offset));
-}
-
-struct device_d *jz_add_uart(int id, unsigned long base, unsigned int clock)
-{
- struct NS16550_plat *serial_plat;
-
- serial_plat = xzalloc(sizeof(*serial_plat));
-
- serial_plat->shift = JZ_UART_SHIFT;
- serial_plat->reg_write = &jz_serial_reg_write;
- serial_plat->clock = clock;
-
- return add_ns16550_device(id, base, 8 << JZ_UART_SHIFT,
- IORESOURCE_MEM_8BIT, serial_plat);
-}
--
1.9.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
