Otherwise it won't get set in a multiimage build.
Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
arch/arm/boards/freescale-mx53-qsb/board.c | 2 ++
arch/arm/boards/freescale-mx53-qsb/env/config-board | 1 -
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/freescale-mx53-qsb/board.c b/arch/arm/boards/freescale-mx53-qsb/board.c
index 74826e4a5e43..0553f1c82895 100644
--- a/arch/arm/boards/freescale-mx53-qsb/board.c
+++ b/arch/arm/boards/freescale-mx53-qsb/board.c
@@ -99,6 +99,7 @@ static int loco_late_init(void)
rev = readl(MX53_IIM_BASE_ADDR + 0x878);
set_board_rev(rev);
printf("MCIMX53-START-R board 1.0 rev %c\n", (rev == 1) ? 'A' : 'B' );
+ barebox_set_hostname("loco-r");
armlinux_set_revision(loco_system_rev);
/* Set VDDGP to 1.25V for 1GHz on SW1 */
mc13xxx_reg_read(mc34708, MC13892_REG_SW_0, &val);
@@ -146,6 +147,7 @@ static int loco_late_init(void)
} else {
/* so we have a DA9053 based board */
printf("MCIMX53-START board 1.0\n");
+ barebox_set_hostname("loco");
armlinux_set_revision(loco_system_rev);
return 0;
}
diff --git a/arch/arm/boards/freescale-mx53-qsb/env/config-board b/arch/arm/boards/freescale-mx53-qsb/env/config-board
index a6cf69ddbc7f..e8e8378f53f5 100644
--- a/arch/arm/boards/freescale-mx53-qsb/env/config-board
+++ b/arch/arm/boards/freescale-mx53-qsb/env/config-board
@@ -3,5 +3,4 @@
# board defaults, do not change in running system. Change /env/config
# instead
-global.hostname=loco
global.linux.bootargs.base="console=ttymxc0,115200"
--
1.9.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
