On Mon, Mar 17, 2014 at 03:43:36PM +0200, Ivor Kruger wrote:
> Thanks for the reply. So I take it I need to edit the mux.c file in the
> PCM049(which is the one I use) board directory. I changed the lines as
> below:
>
> {I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
> {MCSPI1_CLK, (M3)}, /* gpio134 */
> {MCSPI1_SOMI, (M3)}, /* gpio135 */
> {MCSPI1_SIMO, (M3)}, /* gpio136 */
> {MCSPI1_CS0, (M3)}, /* gpio137 */
> {MCSPI1_CS1, (M3)}, /* gpio138 */
> {MCSPI1_CS2, (M3)}, /* gpio139 */
> {MCSPI1_CS3, (M3)}, /* gpio140 */
> {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
>
> This still did not allow me to change pin conditions. So in the board.c
> file for the PCM049, I also added these lines to force the config of the
> pins:
>
> omap_add_display(&pcm049_fb_data);
> gpio_direction_output(135, 1);
> gpio_direction_output(136, 1);
> gpio_direction_output(137, 1);
> gpio_direction_output(138, 1);
> gpio_direction_output(139, 1);
> gpio_direction_output(140, 1);
>
>
> If I then do the gpiolib command inbarebox, the pins are indicated as gpio
> as below:
>
> gpio 133: false
> gpio 134: false
> gpio 135: true gpio
> gpio 136: true gpio
> gpio 137: true gpio
> gpio 138: true gpio
> gpio 139: true gpio
> gpio 140: true gpio
> gpio 141: false
> gpio 142: false
> gpio 143: false
>
> BUT using the commands:
>
> gpio_direction_output 135 0
>
> And
>
> gpio_direction_output 135 1
>
> Still does not change the pin condition.
>
> Is there something else I still need to do?
Generally that's all you have to do: Configure pinmux and use gpio
functions. I'm not very familiar with OMAPs. How does the translation
from MCSPI1_SOMI to gpio135 work? Are you sure the gpio number is
correct? Is gpio generally M3 and what do the other flags lie IEN and
PTU do? I have no idea what goes wrong here, but that would be the next
places I would look at.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
