Hello Sascha, We removed this ODT values, because we had problems. I think before we use this settings we have to do some tests (climate cabinet...) with different modules. Christian Am Freitag, den 14.03.2014, 14:30 +0100 schrieb Sascha Hauer: > From: Christian Hemp <c.hemp@xxxxxxxxx> > > Change the ODT values to 0x11117 (Recommended from Freescale) > see App note AN4579 "i.MX 6 Series Thermal Management Guidelines" > > Signed-off-by: Christian Hemp <c.hemp@xxxxxxxxx> > Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> > --- > arch/arm/boards/phytec-phyflex-imx6/flash-header-phytec-pfla02.h | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boards/phytec-phyflex-imx6/flash-header-phytec-pfla02.h b/arch/arm/boards/phytec-phyflex-imx6/flash-header-phytec-pfla02.h > index 138ae36..fd09054 100644 > --- a/arch/arm/boards/phytec-phyflex-imx6/flash-header-phytec-pfla02.h > +++ b/arch/arm/boards/phytec-phyflex-imx6/flash-header-phytec-pfla02.h > @@ -75,8 +75,8 @@ wm 32 0x021b001c 0x04008048 > wm 32 0x021b0800 0xa1380003 > wm 32 0x021b4800 0xa1380003 > wm 32 0x021b0020 0x00005800 > -wm 32 0x021b0818 0x00022227 > -wm 32 0x021b4818 0x00022227 > +wm 32 0x021b0818 0x00011117 > +wm 32 0x021b4818 0x00011117 > wm 32 0x021b083c 0x433c033f > wm 32 0x021b0840 0x033e033d > wm 32 0x021b483c 0x43490351 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
