On Mon, Mar 17, 2014 at 08:18:58AM +0100, Sascha Hauer wrote: > On Mon, Mar 17, 2014 at 12:28:28PM +0800, Sean Cross wrote: > > Here is the resulting output and BUG from this run: > > > > barebox 2014.03.0-00628-g7fed07d-dirty #158 Mon Mar 17 12:25:45 SGT 2014 > > > > > > Board: Kosagi i.MX6DL Novena Board > > detected i.MX6 DualLite revision 1.1 > > Trying to request region ttb (from 0x4fff4000:0x4fff7fff): ok > > Trying to request region malloc space (from 0x4be00000:0x4fdfffff): ok > > Trying to request region barebox (from 0x4fe00000:0x4fe4b4a7): ok > > Trying to request region barebox data (from 0x4fe4b4a8:0x4fe5c8f7): ok > > Trying to request region bss (from 0x4fe5c8f8:0x4fe6214f): ok > > Trying to request region stack (from 0x4fff8000:0x4fffffff): ok > > mmu: find_pte: TTB for address 0x4cd1e000 is not of type table > > mmu: Memory banks: > > mmu: #0 0x10000000 - 0xffffffff > > So you have one memory bank that starts at 0x10000000 which is the > standard SDRAM base for i.MX6. Good. But why is the size 0? Have you > specified this in your devicetree? It should contain the correct size. > It could also be that we do not parse #ddress-cells / #size-cells > correctly (in case one of these is not 1 in your devicetree). > does this smells like an error case which we should handle with a slightly eprintf? :-) - Alex _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
