> -----Original Message----- > From: barebox [mailto:barebox-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of > Vanhauwaert Wouter > Sent: donderdag 6 maart 2014 13:04 > To: Sascha Hauer > Cc: barebox@xxxxxxxxxxxxxxxxxxx > Subject: RE: at91sam9260-ek ... > > > > I'd probably start at somewhere near: > > > > ecdb717 at91/boards: switch to software ecc as in linux kernel > > > > But I don't know if that version really works. > > > > (If you don't know already, you can always start barebox second stage from an > > already running barebox, normally you shouldn't have to reflash for each > > bisecting step. Something like "tftp barebox.bin /dev/ram0; go /dev/ram0" > > should work.) > > > > I did some tests and seems that it worked ok until version release 2013.08.0, > from 2013.09.0 on it gives me these errors... > Between 2013.09.0 and 2013.08.0 there's much changed in the mtd driver... Also in atmel_nand.c, 2 parameters (int oob_required, int page) are added to the page operations. Although nothing is done with it. I don't know what's going on further. I'll just stick with 2013.08.0 for now, I think it'll just fit my needs. Maybe somebody who knows what's going on can take a look at it? Grtz, Wouter _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
