The mx31moboard is used on the marXbot, Eyebot and Footbot robot.
Signed-off-by: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
---
arch/arm/boards/Makefile | 1 +
arch/arm/boards/mx31moboard/Makefile | 20 ++
arch/arm/boards/mx31moboard/env/boot/nor | 9 +
arch/arm/boards/mx31moboard/env/boot/sd | 8 +
arch/arm/boards/mx31moboard/env/boot/usbmsd | 8 +
arch/arm/boards/mx31moboard/env/config-board | 7 +
arch/arm/boards/mx31moboard/env/init/mtdparts-nor | 11 +
arch/arm/boards/mx31moboard/lowlevel.c | 114 +++++++++
arch/arm/boards/mx31moboard/mx31moboard.c | 259 +++++++++++++++++++++
arch/arm/boards/mx31moboard/mx31moboard.dox | 10 +
arch/arm/mach-imx/Kconfig | 11 +
11 files changed, 458 insertions(+)
create mode 100644 arch/arm/boards/mx31moboard/Makefile
create mode 100644 arch/arm/boards/mx31moboard/env/boot/nor
create mode 100644 arch/arm/boards/mx31moboard/env/boot/sd
create mode 100644 arch/arm/boards/mx31moboard/env/boot/usbmsd
create mode 100644 arch/arm/boards/mx31moboard/env/config-board
create mode 100644 arch/arm/boards/mx31moboard/env/init/mtdparts-nor
create mode 100644 arch/arm/boards/mx31moboard/lowlevel.c
create mode 100644 arch/arm/boards/mx31moboard/mx31moboard.c
create mode 100644 arch/arm/boards/mx31moboard/mx31moboard.dox
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index ffd6bb3..0d8c9cf 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_MACH_MIOA701) += mioa701/
obj-$(CONFIG_MACH_MMCCPU) += mmccpu/
obj-$(CONFIG_MACH_MX23EVK) += freescale-mx23-evk/
obj-$(CONFIG_MACH_MX28EVK) += freescale-mx28-evk/
+obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard/
obj-$(CONFIG_MACH_MX6Q_ARM2) += freescale-mx6-arm2/
obj-$(CONFIG_MACH_NESO) += guf-neso/
obj-$(CONFIG_MACH_NOMADIK_8815NHK) += nhk8815/
diff --git a/arch/arm/boards/mx31moboard/Makefile b/arch/arm/boards/mx31moboard/Makefile
new file mode 100644
index 0000000..83a6016
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/Makefile
@@ -0,0 +1,20 @@
+#
+# (C) Copyright 2007 Juergen Beisert <jbe@xxxxxxxxxxxxxx>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+#
+
+lwl-y += lowlevel.o
+obj-y += mx31moboard.o
diff --git a/arch/arm/boards/mx31moboard/env/boot/nor b/arch/arm/boards/mx31moboard/env/boot/nor
new file mode 100644
index 0000000..e36655c
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/env/boot/nor
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "NOR Flash"
+ exit
+fi
+
+global.bootm.image="/dev/nor0.kernel"
+global.linux.bootargs.dyn.root="root=/dev/mtdblock3 ro"
diff --git a/arch/arm/boards/mx31moboard/env/boot/sd b/arch/arm/boards/mx31moboard/env/boot/sd
new file mode 100644
index 0000000..16e734d
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/env/boot/sd
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "SD Boot"
+ exit
+fi
+
+boot mci0
diff --git a/arch/arm/boards/mx31moboard/env/boot/usbmsd b/arch/arm/boards/mx31moboard/env/boot/usbmsd
new file mode 100644
index 0000000..6a16d3e
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/env/boot/usbmsd
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "USB Boot"
+ exit
+fi
+
+boot ehci0
diff --git a/arch/arm/boards/mx31moboard/env/config-board b/arch/arm/boards/mx31moboard/env/config-board
new file mode 100644
index 0000000..f67b333
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/env/config-board
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+# board defaults, do not change in running system. Change /env/config
+# instead
+
+global.boot.default="usbmsd sd nor"
+global.linux.bootargs.base="console=ttymxc0,921600"
diff --git a/arch/arm/boards/mx31moboard/env/init/mtdparts-nor b/arch/arm/boards/mx31moboard/env/init/mtdparts-nor
new file mode 100644
index 0000000..f09a9cc
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/env/init/mtdparts-nor
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "NOR partitions"
+ exit
+fi
+
+mtdparts="512k(nor0.barebox)ro,256k(nor0.bareboxenv),4M(nor0.kernel),-(nor0.root)"
+kernelname="physmap-flash.0"
+
+mtdparts-add -d nor0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/mx31moboard/lowlevel.c b/arch/arm/boards/mx31moboard/lowlevel.c
new file mode 100644
index 0000000..e9ffb74
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/lowlevel.c
@@ -0,0 +1,114 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
+ * (c) 2014 EPFL, Philippe Rétornaz <philippe.retornaz@xxxxxxx>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <asm/barebox-arm.h>
+#include <asm/system.h>
+#include <asm-generic/memory_layout.h>
+#include <asm-generic/sections.h>
+#include <asm/barebox-arm-head.h>
+#include <mach/imx31-regs.h>
+#include <mach/imx-pll.h>
+#include <asm/barebox-arm-head.h>
+#include <mach/esdctl.h>
+
+static noinline __noreturn void mx31moboard_startup(void)
+{
+ uint32_t r;
+ volatile int c;
+
+ /* Enable IPU Display interface */
+ writel(1 << 6, MX31_IPU_CTRL_BASE_ADDR);
+
+ writel(0x074B0BF5, MX31_CCM_BASE_ADDR + MX31_CCM_CCMR);
+
+ for (c = 0; c < 0x4000; c++) ;
+
+ writel(0x074B0BF5 | MX31_CCMR_MPE, MX31_CCM_BASE_ADDR +
+ MX31_CCM_CCMR);
+ writel((0x074B0BF5 | MX31_CCMR_MPE) & ~MX31_CCMR_MDS,
+ MX31_CCM_BASE_ADDR + MX31_CCM_CCMR);
+
+ writel(MX31_PDR0_CSI_PODF(0x1ff) | \
+ MX31_PDR0_PER_PODF(7) | \
+ MX31_PDR0_HSP_PODF(3) | \
+ MX31_PDR0_NFC_PODF(5) | \
+ MX31_PDR0_IPG_PODF(1) | \
+ MX31_PDR0_MAX_PODF(3) | \
+ MX31_PDR0_MCU_PODF(0), \
+ MX31_CCM_BASE_ADDR + MX31_CCM_PDR0);
+
+ writel(IMX_PLL_PD(0) | IMX_PLL_MFD(0x33) |
+ IMX_PLL_MFI(0xa) | IMX_PLL_MFN(0x0C),
+ MX31_CCM_BASE_ADDR + MX31_CCM_MPCTL);
+ writel(IMX_PLL_PD(1) | IMX_PLL_MFD(0x43) | IMX_PLL_MFI(12) |
+ IMX_PLL_MFN(1), MX31_CCM_BASE_ADDR +
+ MX31_CCM_SPCTL);
+
+ /*
+ * Configure IOMUXC
+ * Clears 0x43fa_c26c - 0x43fa_c2dc with 0,
+ * except 0x43fa_c278 (untouched), 0x43fa_c27c (set to 0x1000)
+ * and 0x43fa_c280 (untouched)
+ * (behaviour copied by sha, source unknown)
+ */
+ writel(0, 0x43fac26c); /* SDCLK */
+ writel(0, 0x43fac270); /* CAS */
+ writel(0, 0x43fac274); /* RAS */
+
+ writel(0x1000, 0x43fac27c); /* CSD0 */
+
+ /* DQM3, DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 */
+ for (r = 0x43fac284; r <= 0x43fac2dc; r += 4)
+ writel(0, r);
+
+ /* Skip SDRAM initialization if we run from RAM */
+ r = get_pc();
+ if (r > 0x80000000 && r < 0xa0000000)
+ imx31_barebox_entry(0);
+
+ writel(0x00000004, MX31_ESDCTL_BASE_ADDR + IMX_ESDMISC);
+ writel(0x00695727, MX31_ESDCTL_BASE_ADDR + IMX_ESDCFG0);
+ writel(0x92100000, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
+ writel(0x12344321, MX31_CSD0_BASE_ADDR + 0xf00);
+ writel(0xa2100000, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
+ writel(0x12344321, MX31_CSD0_BASE_ADDR);
+ writel(0x12344321, MX31_CSD0_BASE_ADDR);
+ writel(0xb2100000, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
+ writeb(0xda, MX31_CSD0_BASE_ADDR + 0x33);
+ writeb(0xff, MX31_CSD0_BASE_ADDR + 0x01000000);
+ writel(0x82226080, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
+ writel(0xDEADBEEF, MX31_CSD0_BASE_ADDR);
+ writel(0x0000000c, MX31_ESDCTL_BASE_ADDR + IMX_ESDMISC);
+
+ imx31_barebox_entry(0);
+
+}
+
+void __bare_init __naked barebox_arm_reset_vector(void)
+{
+ arm_cpu_lowlevel_init();
+
+ /* Temporary stack location in internal SRAM */
+ arm_setup_stack(MX31_IRAM_BASE_ADDR + MX31_IRAM_SIZE - 8);
+
+ mx31moboard_startup();
+}
diff --git a/arch/arm/boards/mx31moboard/mx31moboard.c b/arch/arm/boards/mx31moboard/mx31moboard.c
new file mode 100644
index 0000000..2ec1f4f
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/mx31moboard.c
@@ -0,0 +1,259 @@
+/*
+ * (C) 2007 Pengutronix, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
+ * (C) 2014 EPFL, Philippe Rétornaz <philippe.retornaz@xxxxxxx>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * Board support for EPFL's, i.MX31 based CPU card
+ *
+ * Based on:
+ * Board support for Phytec's, i.MX31 based CPU card, called: PCM037
+ */
+
+#include <common.h>
+#include <init.h>
+#include <driver.h>
+#include <fs.h>
+#include <gpio.h>
+#include <led.h>
+#include <environment.h>
+#include <usb/ulpi.h>
+#include <mach/imx31-regs.h>
+#include <mach/iomux-mx31.h>
+#include <asm/armlinux.h>
+#include <asm/sections.h>
+#include <mach/weim.h>
+#include <io.h>
+#include <asm/mmu.h>
+#include <partition.h>
+#include <generated/mach-types.h>
+#include <asm/barebox-arm.h>
+#include <mach/devices-imx31.h>
+
+#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
+#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
+
+static void mx31moboard_usb_init(void)
+{
+ u32 tmp;
+
+ if (!IS_ENABLED(CONFIG_USB))
+ return;
+
+ /* enable clock */
+ tmp = readl(0x53f80000);
+ tmp |= (1 << 9);
+ writel(tmp, 0x53f80000);
+
+ /* Host 2 */
+ tmp = readl(MX31_IOMUXC_GPR);
+ tmp |= 1 << 11; /* IOMUX GPR: enable USBH2 signals */
+ writel(tmp, MX31_IOMUXC_GPR);
+
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO));
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO));
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC));
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC));
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC));
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC));
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC));
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC));
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC));
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC));
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC));
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC));
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC));
+ imx_iomux_mode(IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC));
+
+#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
+ | PAD_CTL_ODE_CMOS)
+ imx_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG | PAD_CTL_100K_PU);
+ imx_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG | PAD_CTL_100K_PU);
+ imx_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG | PAD_CTL_100K_PU);
+ imx_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG | PAD_CTL_100K_PU);
+ imx_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
+ imx_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
+ imx_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */
+ imx_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */
+ imx_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */
+ imx_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */
+ imx_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */
+ imx_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */
+
+
+ gpio_request(USB_RESET_B, "usb-reset");
+ gpio_direction_output(USB_RESET_B, 0);
+ mdelay(5);
+ gpio_set_value(USB_RESET_B, 1);
+ mdelay(10);
+
+ gpio_request(USBH2_EN_B, "usbh2-en");
+ gpio_direction_output(USBH2_EN_B, 0);
+ udelay(900);
+ gpio_set_value(USBH2_EN_B, 1);
+ udelay(200);
+
+ tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x600);
+ tmp &= ~((3 << 21) | 1);
+ tmp |= (1 << 5) | (1 << 16) | (1 << 19) | (1 << 20);
+ writel(tmp, MX31_USB_OTG_BASE_ADDR + 0x600);
+
+ tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x584);
+ tmp &= ~(3 << 30);
+ tmp |= 2 << 30;
+ writel(tmp, MX31_USB_OTG_BASE_ADDR + 0x584);
+
+ gpio_set_value(USBH2_EN_B, 0);
+
+ mdelay(50);
+
+ ulpi_setup((void *)(MX31_USB_OTG_BASE_ADDR + 0x570), 1);
+
+ /* Set to Host mode */
+ tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x1a8);
+ writel(tmp | 0x3, MX31_USB_OTG_BASE_ADDR + 0x1a8);
+
+}
+
+static struct gpio_led mx31moboard_leds[] = {
+ {
+ .led = {
+ .name = "coreboard-led-0:red:running"
+ },
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+ }, {
+ .led = {
+ .name = "coreboard-led-1:red",
+ },
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_STX0),
+ }, {
+ .led = {
+ .name = "coreboard-led-2:red",
+ },
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0),
+ }, {
+ .led = {
+ .name = "coreboard-led-3:red",
+ },
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
+ },
+};
+
+static void mx31moboard_add_leds(void)
+{
+ int i;
+
+ if (!IS_ENABLED(CONFIG_LED_GPIO))
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(mx31moboard_leds); i++) {
+ led_gpio_register(&mx31moboard_leds[i]);
+ led_set(&mx31moboard_leds[i].led, 0);
+ }
+
+ led_set_trigger(LED_TRIGGER_HEARTBEAT, &mx31moboard_leds[0].led);
+}
+
+static int mx31moboard_mmu_init(void)
+{
+ l2x0_init((void __iomem *)0x30000000, 0x00030024, 0x00000000);
+
+ return 0;
+}
+postmmu_initcall(mx31moboard_mmu_init);
+
+static const struct devfs_partition mx31moboard_nor0_partitions[] = {
+ {
+ .offset = 0,
+ .size = SZ_512K,
+ .flags = DEVFS_PARTITION_FIXED,
+ .name = "self0",
+ }, {
+ .offset = DEVFS_PARTITION_APPEND,
+ .size = SZ_256K,
+ .name = "env0",
+ }, {
+ /* Sentinel */
+ }
+};
+
+static int mx31moboard_devices_init(void)
+{
+ /* CS0: Nor Flash */
+ imx31_setup_weimcs(0, 0x0000CC03, 0xa0330D01, 0x00220800);
+
+ /*
+ * Up to 32MiB NOR type flash, connected to
+ * CS line 0, data width is 16 bit
+ */
+ add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX31_CS0_BASE_ADDR, SZ_32M, 0);
+
+ imx31_add_mmc0(NULL);
+
+ /*
+ * Create partitions that should be
+ * not touched by any regular user
+ */
+ devfs_create_partitions("nor0", mx31moboard_nor0_partitions);
+ protect_file("/dev/env0", 1);
+
+ mx31moboard_usb_init();
+ add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC,
+ MX31_USB_HS2_BASE_ADDR, NULL);
+
+ mx31moboard_add_leds();
+
+ armlinux_set_architecture(MACH_TYPE_MX31MOBOARD);
+
+ return 0;
+}
+
+device_initcall(mx31moboard_devices_init);
+
+static unsigned int mx31moboard_iomux[] = {
+ /* UART1 */
+ MX31_PIN_RXD1__RXD1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_CTS1__GPIO2_7,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+ /* LEDS */
+ MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
+ MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
+};
+
+static int imx31_console_init(void)
+{
+ imx_iomux_setup_multiple_pins(mx31moboard_iomux,
+ ARRAY_SIZE(mx31moboard_iomux));
+
+ gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+ gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+
+ barebox_set_model("EPFL mx31moboard");
+ barebox_set_hostname("mx31moboard");
+
+ imx31_add_uart0();
+
+ return 0;
+}
+
+console_initcall(imx31_console_init);
diff --git a/arch/arm/boards/mx31moboard/mx31moboard.dox b/arch/arm/boards/mx31moboard/mx31moboard.dox
new file mode 100644
index 0000000..41c8bbb
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/mx31moboard.dox
@@ -0,0 +1,10 @@
+/** @page mx31moboard EPFL mx31moboard
+
+This CPU card is based on a Freescale i.MX31 CPU. The card is shipped with:
+
+- 32MiB NOR type Flash Memory
+- 128MiB LPDDR
+- A least one SD slot
+- A least one USB host (H2)
+
+*/
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 79ea694..b7e7533 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -14,6 +14,7 @@ config ARCH_TEXT_BASE
default 0xa7f00000 if MACH_PCA100
default 0xa0000000 if MACH_PCM038
default 0x87f00000 if MACH_PCM037
+ default 0x87f00000 if MACH_MX31MOBOARD
default 0x87f00000 if MACH_PCM043
default 0x08f80000 if MACH_SCB9328
default 0xa7e00000 if MACH_NESO
@@ -363,6 +364,16 @@ config MACH_PCM037
Say Y here if you are using Phytec's phyCORE-i.MX31 (pcm037) equipped
with a Freescale i.MX31 Processor
+config MACH_MX31MOBOARD
+ bool "mx31moboard-i.MX31"
+ select ARCH_IMX31
+ select USB_ULPI if USB
+ select HAVE_DEFAULT_ENVIRONMENT_NEW
+ select ARCH_HAS_L2X0
+ help
+ Say Y here if you are using EPFL mx31moboard board equipped
+ with a Freescale i.MX31 Processor
+
# ----------------------------------------------------------
comment "i.MX35 Boards"
--
1.7.9.5
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
