On Wed, Feb 26, 2014 at 08:15:00AM +0100, andreas.willig@xxxxxxx wrote: > Hi Sascha > i saw this Thread too in the archives, but since no code was entered into > repo i suppose the effort was not successful. By my opinion it should be > solvable, since U-Boot get's it running and sources are not that different > concerning this point. I did compare the BCB section in U-Boot with BCB > sections in Barebox and for the first point of view, i did not find the > difference, I'm just about to debug this using Lauterbach. > > Btw is there a well known procedure to keep i.MX6Q cool? I got a passive > cooler, but especially during debugging system get's heat up over 80�C !!! > Which issues a reset using u-boot. Philipp has recently sent a patch which turns off the GPU clocks in barebox. This could help a little. The path sits in -next right now. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox