Hello Before, I was working with Barebox 2013.05, which worked fine. Now I updated my sources to barebox 2013.07, but my kernel doesn't boot anymore. Barebox itself works as expected. When I do: bootm -v /mnt/tftp/uImage Image Name: Linux-2.6.35.3-01169-gbc81590-di Created: 2013-06-03 13:29:30 UTC OS: Linux Architecture: ARM Type: Kernel Image Compression: uncompressed Data Size: 2834488 Bytes = 2.7 MiB Load Address: 70008000 Entry Point: 70008000 Loading OS U-Boot uImage '/mnt/tftp/uImage' OS image is at 0x70008000-0x702bc037 Passing control to ARM Linux uImage handler Starting kernel at 0x70008000... commandline: console=ttymxc4,115200 mtdparts=mxc_nand:3M(nand0.systemkernel),-(nand0.root);m25p0:384k(m25p0.barebox)ro,128k(m25p0.bareboxenv),3M(m25p0.recoverykernel)ro,512k(m25p0.storage) arch_number: 3297 And that's it, it doesn't do anything after it. Althought this works with the previous barebox. What can cause this? Grtz, Wouter _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
