On 22:02 Tue 06 Aug , Pawel Suchanecki wrote:
> Hello dear list,
>
> I have barebox 2013.07/08.0 up and running, however I can not make it
> display the splash on my Mini2440.
>
> I have it built with:
>
> --- Video drivers
> -*- S3C244x framebuffer driver
> [*] S3C244x verbose framebuffer info
>
> & "Library gui routines"
>
> [*] bmp
> [*] png
> PNG Lib (lodePNG) --->
>
> but when I run:
>
> mini2440:/ splash -f /dev/fb0 /mnt/F.bmp
> mini2440:/ echo $?
> 1
>
> Splash command reads the file from mounted USB storage (pendrive),
> which takes a while but exits with error.
>
> Also bmp & png commands are not available.
because the image renderer detect it automaticaly so you do need to care which
format the splash command use
>
> I found the "fb0.enable=1" turning on the LCD but there is some
> garbage, which changes when I try to load different files.
>
> I try to load .bmp-s generated by GIMP in 24 bit mode (with and
> without saving the information on color space).
>
> It does not load barebox.png from logo/png{8,24}/200x200/color
> directory of barebox-2013.08.0 distro either.
>
> What am I doing wrong?
>
are you sure your lcd is connecte correctly?
I try the png support work fine sandbox & atmel at91 boards
Best Regards,
J.
> Thank you,
> Pawel
>
> p.s. please CC me as I am not on the list atm.
>
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
