Hello! I find this thread while googling today: http://comments.gmane.org/gmane.comp.boot-loaders.barebox/4051 I downloaded barebox package from official site and some cross-compilers from github/raspberry I configured barebox for ARM architecture and turned on menuconfig. Then I type make and press enter - and I noticed some new files in barebox directory same as those from this thread: http://www.raspberrypi.org/phpBB3/viewtopic.php?t=25087&p=230000 I formated sd card with fat32 and copy on it 3 files same way like man from this post http://comments.gmane.org/gmane.comp.boot-loaders.barebox/4051 I downloaded loader.bin file and start.elf file from history (setp. 2012) version of raspberry firmware from github. Then i booted PI - but nothing happens - there was only rainbow on the screen all time. What should i do? Let me recall - all my knowledge how to boot RPI with Barebox comes from this post Yes, it works for me. You need an sd card with a single partition fat32 with inside bootcode.bin, loader.bin and start.elf (you can find the files here https://github.com/raspberrypi/firmware/tree/master/boot) Then just copy barebox.bin on the card and rename it kernel.img. Please, let me know if you have any problem. Thank you, -- Carlo Caione <<< Sorry for my english. Darek _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
