Use DT description to register the fec MAC address. Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- arch/arm/boards/freescale-mx6-sabrelite/board.c | 23 ----------------------- arch/arm/boards/freescale-mx6-sabresd/board.c | 22 ---------------------- arch/arm/dts/imx6q-sabrelite.dts | 4 ++++ arch/arm/dts/imx6qdl-sabresd.dtsi | 4 ++++ 4 files changed, 8 insertions(+), 45 deletions(-) diff --git a/arch/arm/boards/freescale-mx6-sabrelite/board.c b/arch/arm/boards/freescale-mx6-sabrelite/board.c index ff27b05..39f465b 100644 --- a/arch/arm/boards/freescale-mx6-sabrelite/board.c +++ b/arch/arm/boards/freescale-mx6-sabrelite/board.c @@ -106,26 +106,6 @@ static int sabrelite_ksz9021rn_setup(void) */ fs_initcall(sabrelite_ksz9021rn_setup); -static inline int imx6_iim_register_fec_ethaddr(void) -{ - u32 value; - u8 buf[6]; - - value = readl(MX6_OCOTP_BASE_ADDR + 0x630); - buf[0] = (value >> 8); - buf[1] = value; - - value = readl(MX6_OCOTP_BASE_ADDR + 0x620); - buf[2] = value >> 24; - buf[3] = value >> 16; - buf[4] = value >> 8; - buf[5] = value; - - eth_register_ethaddr(0, buf); - - return 0; -} - static void sabrelite_ehci_init(void) { imx6_usb_phy2_disable_oc(); @@ -157,9 +137,6 @@ static int sabrelite_coredevices_init(void) { phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); - - imx6_iim_register_fec_ethaddr(); - return 0; } coredevice_initcall(sabrelite_coredevices_init); diff --git a/arch/arm/boards/freescale-mx6-sabresd/board.c b/arch/arm/boards/freescale-mx6-sabresd/board.c index 033a253..422c0d9 100644 --- a/arch/arm/boards/freescale-mx6-sabresd/board.c +++ b/arch/arm/boards/freescale-mx6-sabresd/board.c @@ -80,26 +80,6 @@ static void sabresd_phy_reset(void) gpio_set_value(IMX_GPIO_NR(1, 25), 1); } -static inline int imx6_iim_register_fec_ethaddr(void) -{ - u32 value; - u8 buf[6]; - - value = readl(MX6_OCOTP_BASE_ADDR + 0x630); - buf[0] = (value >> 8); - buf[1] = value; - - value = readl(MX6_OCOTP_BASE_ADDR + 0x620); - buf[2] = value >> 24; - buf[3] = value >> 16; - buf[4] = value >> 8; - buf[5] = value; - - eth_register_ethaddr(0, buf); - - return 0; -} - static int sabresd_devices_init(void) { armlinux_set_bootparams((void *)0x10000100); @@ -118,8 +98,6 @@ static int sabresd_coredevices_init(void) phy_register_fixup_for_uid(PHY_ID_AR8031, AR_PHY_ID_MASK, ar8031_phy_fixup); - imx6_iim_register_fec_ethaddr(); - return 0; } /* diff --git a/arch/arm/dts/imx6q-sabrelite.dts b/arch/arm/dts/imx6q-sabrelite.dts index 483a39d..e1e967d 100644 --- a/arch/arm/dts/imx6q-sabrelite.dts +++ b/arch/arm/dts/imx6q-sabrelite.dts @@ -108,6 +108,10 @@ }; }; +&ocotp1 { + barebox,provide-mac-address = <&fec 0x620>; +}; + &usbotg { vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; diff --git a/arch/arm/dts/imx6qdl-sabresd.dtsi b/arch/arm/dts/imx6qdl-sabresd.dtsi index e21f6a8..0d32278 100644 --- a/arch/arm/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/dts/imx6qdl-sabresd.dtsi @@ -52,6 +52,10 @@ status = "okay"; }; +&ocotp1 { + barebox,provide-mac-address = <&fec 0x620>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_1>; -- 1.8.3.2 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox