On Tue, Jul 16, 2013 at 12:30:12PM +0400, antonynpavlov@xxxxxxxxx wrote:
> Hi, all!
>
> We have common request_sdram_region("stack", ...)
> in mem_malloc_resource() (common/memory.c).
>
> But we also have ARM-special request_sdram_region("stack", ...)
> inside arm_request_stack() initcall.
>
> In normal situation there is no problem at all.
>
> Here is the 'iomem' log for versatile qemu virtual board:
>
> 0x00000000 - 0x03ffffff (size 0x04000000) ram0
> 0x00c00000 - 0x00ffffff (size 0x00400000) malloc space
> 0x01000000 - 0x0102d5f3 (size 0x0002d5f4) barebox
> 0x0102d5f4 - 0x0102f307 (size 0x00001d14) barebox data
> 0x0102f308 - 0x010346db (size 0x000053d4) bss
> 0x03ff8000 - 0x03ffffff (size 0x00008000) stack
>
> But if the board use MEMORY_LAYOUT_FIXED then
> we can have a problem.
>
> I enabled CONFIGURABLE_MEMORY_LAYOUT for versatile.
> Here is a patch:
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index bd10591..2969b19 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -134,6 +134,7 @@ config ARCH_VERSATILE
> bool "ARM Versatile boards (ARM926EJ-S)"
> select CPU_ARM926T
> select GPIOLIB
> + select HAVE_CONFIGURABLE_MEMORY_LAYOUT
>
> config ARCH_VEXPRESS
> bool "ARM Vexpres boards"
>
> I have rebuilt barebox with this memory layout:
>
> CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y
> # CONFIG_MEMORY_LAYOUT_DEFAULT is not set
> CONFIG_MEMORY_LAYOUT_FIXED=y
> CONFIG_STACK_BASE=0x20000
> CONFIG_STACK_SIZE=0x8000
> CONFIG_MALLOC_BASE=0x00c00000
> CONFIG_MALLOC_SIZE=0x400000
>
> Here is the 'iomem' log for MEMORY_LAYOUT_FIXED:
>
> 0x00000000 - 0x03ffffff (size 0x04000000) ram0
> 0x00020000 - 0x00027fff (size 0x00008000) stack
> 0x00c00000 - 0x00ffffff (size 0x00400000) malloc space
> 0x01000000 - 0x0102d61b (size 0x0002d61c) barebox
> 0x0102d61c - 0x0102f327 (size 0x00001d0c) barebox data
> 0x0102f328 - 0x010346fb (size 0x000053d4) bss
> 0x03ff8000 - 0x03ffffff (size 0x00008000) stack
>
> The result is confusing!
> We got two stack regions:
> * the first region registered by common code (CONFIG_STACK_BASE=0x20000);
> * the second region registered by ARM-specific code.
We should probably get rid of CONFIG_MEMORY_LAYOUT_FIXED completely.
Currently this is used only by some omap xloader configurations, but
this could be changed.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
