The following adds support for AHCI based SATA controllers. Some
cleanup has to be done first as currently our ATA support assumes
that all devices have a SFF interface, so this has to be separated
first.
----------------------------------------------------------------
Sascha Hauer (9):
ata: register disks as /dev/ata*
ata: fix status flags
ata: split ide sff suport to separate file
ata: align ata command defines with kernel
ata: Use dma_alloc for buffer
ata: Add ahci support
mfd: Add i.MX6 iomux gpr header file
ata: Add i.MX AHCI driver
ARM i.MX5: Add SATA support
arch/arm/mach-imx/clk-imx5.c | 1 +
arch/arm/mach-imx/include/mach/devices-imx53.h | 5 +
arch/arm/mach-imx/include/mach/imx53-regs.h | 2 +
drivers/ata/Kconfig | 15 +-
drivers/ata/Makefile | 3 +
drivers/ata/ahci.c | 678 ++++++++++++++++++++++++
drivers/ata/ahci.h | 182 +++++++
drivers/ata/disk_ata_drive.c | 345 ++----------
drivers/ata/ide-sff.c | 343 ++++++++++++
drivers/ata/intf_platform_ide.c | 2 +-
drivers/ata/pata-imx.c | 2 +-
drivers/ata/sata-imx.c | 155 ++++++
include/ata_drive.h | 43 +-
include/mfd/imx6q-iomuxc-gpr.h | 320 +++++++++++
14 files changed, 1783 insertions(+), 313 deletions(-)
create mode 100644 drivers/ata/ahci.c
create mode 100644 drivers/ata/ahci.h
create mode 100644 drivers/ata/ide-sff.c
create mode 100644 drivers/ata/sata-imx.c
create mode 100644 include/mfd/imx6q-iomuxc-gpr.h
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
