Pinmuxing was wrong and no GPMI device was created.
Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
---
arch/arm/boards/karo-tx28/tx28.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/karo-tx28/tx28.c b/arch/arm/boards/karo-tx28/tx28.c
index a62cb82..6e8da15 100644
--- a/arch/arm/boards/karo-tx28/tx28.c
+++ b/arch/arm/boards/karo-tx28/tx28.c
@@ -35,11 +35,12 @@ static const uint32_t tx28_pad_setup[] = {
GPMI_D6 | VE_3_3V | PULLUP(1),
GPMI_D7 | VE_3_3V | PULLUP(1),
GPMI_READY0 | VE_3_3V | PULLUP(0), /* external PU */
+ GPMI_CE0N | VE_3_3V | PULLUP(1),
GPMI_RDN | VE_3_3V | PULLUP(1),
GPMI_WRN | VE_3_3V | BITKEEPER(1),
GPMI_ALE | VE_3_3V | PULLUP(1),
GPMI_CLE | VE_3_3V | PULLUP(1),
- GPMI_RESETN_GPIO | VE_3_3V | GPIO_IN, /* act as WP, external PU */
+ GPMI_RESETN | VE_3_3V | PULLUP(0), /* external PU */
/* Network interface */
@@ -91,6 +92,9 @@ static int tx28_devices_init(void)
base_board_init();
+ add_generic_device("mxs_nand", 0, NULL, MXS_GPMI_BASE, 0x2000,
+ IORESOURCE_MEM, NULL);
+
return 0;
}
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
